1. Catalogs
  2. Anlidar Industrial - MyTorq
  3. MYCS-ID80 MYCS-80 MYCS-ID80-D
video corpo

MYCS-ID80 MYCS-80 MYCS-ID80-D

MYCS-ID80 MYCS-80 MYCS-ID80-D

MYCS-ID80 MYCS-80 MYCS-ID80-D

Product catalog summary
Icon Explanation: The manual includes icons indicating the need to read the manual, caution, double insulation, indoor use only, no humidity, no fire, no disassembly, no disposal, CE and ETL certifications.
Caution: Users are advised to read all instructions carefully to avoid electric shock, fire, or injury. The charger must be operated under the correct voltage, stored in a clean, dry area, and not exposed to extreme conditions. Only KILEWS batteries should be used, and disassembly or modification of the charger is prohibited.
Grounding Instruction: The charger must always be grounded to prevent electrical shock. The grounding wire is yellow-green and should not be connected to an electrified connector.
Operation Instruction: Before use, check the power cord for damage. The charger should be kept away from oil, chemicals, and heat. When not in use, unplug and store it safely. The manual provides detailed steps for battery assembly and removal.
Protection Functions: The charger includes overcharge, current, shortage, reverse current, ID recognition, and temperature protections. Specific temperature thresholds trigger different charging modes or stop charging to protect the battery and charger.
Display Descriptions: The manual describes the light and sound indicators for various charging conditions, including normal charging, charging completion, abnormal temperature, battery issues, and communication errors.
Specifications: The charger models MYCS-ID80, MYCS-80, and MYCS-ID80-D have specific input and output voltages, dimensions, and weight. They are compatible with certain Li-ion battery models, with charging times and capacities specified.
Important Notes: Users are reminded to save the instructions and note that the company reserves the right to modify the product without notice.
See more

Catalog excerpts

MYCS-ID80 MYCS-80 MYCS-ID80-D-1

OPERATION MANUAL FOR CHARGE STATION

 Open the catalog to page 1
MYCS-ID80 MYCS-80 MYCS-ID80-D-2

Icon Explanation Read manual Double insulation Caution Please read all instructions carefully before operate the rechargeable battery and charger. Also please follow all the instructions and pay attention to all the warring. Please operate under the correct voltage to the charger in according with the operation manual. When charging the battery, please make sure the grounding and safety components are properly attached before operating. The charger should store in clean and dry area. Do not place heave stuff on the charger. Please do not charge the battery when the temperature is above 33℃. Please...

 Open the catalog to page 2
MYCS-ID80 MYCS-80 MYCS-ID80-D-3

Caution 1. Please match the correct Lithium-ion rechargeable battery for this charger, do not apply different type or brand of battery on this charger, otherwise may cause error or danger. 2. Please match the charger with the battery models the use of other than genuine SAING EI replacement parts or battery may result in decreased tool performance and increased maintenance and may invalidate all warranties. 3. Keep children, and bystanders away while charging the battery, in case of danger. 4. Please do not plug in the charger when the plug or users’ hand is wet. 5. To disassemble or modify the...

 Open the catalog to page 3
MYCS-ID80 MYCS-80 MYCS-ID80-D-4

1. Over charged protection 3. Shortage protection (fuse implement) 4. Battery reverse current protection 5. MYCS-ID80/MYCS-ID80-D Built-in ID recognition feature protection Temperature protection detail explanation (1) When the battery temperature is between 0-10°C, the charger will use low current to pre-charge the battery until the battery temperature higher than 10C , then the charger switch back to normal charging mode. When the battery temperature is below 0C, the charger will stop charging the battery until the battery temperature is higher than 0C. (2) When the battery temperature is above...

 Open the catalog to page 4
MYCS-ID80 MYCS-80 MYCS-ID80-D-5

Please note: if charger appear Abnormal status, please contact SAING EI or SAING EI’s agent.

 Open the catalog to page 5
MYCS-ID80 MYCS-80 MYCS-ID80-D-6

Please note: if charger appear Abnormal status, please contact SAING EI or SAING EI’s agent.

 Open the catalog to page 6
MYCS-ID80 MYCS-80 MYCS-ID80-D-7

Our company reserves the right to modify the product without prior notice.

 Open the catalog to page 7
MYCS-ID80 MYCS-80 MYCS-ID80-D-8

CUSTOMER ITEM NO: TITLE: THIRD ANGLE PROJECTION. UNIT SCALE SHT NO. OF SHTS. SHRINK DATE DATE DWG NAME DWG NO: MATERIAL DES. BY CHKD.BY

 Open the catalog to page 8
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.