CNC-1000
16Pages

AUTOMATIC SCREW CNC SERVOPRESS MODEL CNC-1000 Vertical frame composed by lower stand support, lower high-rigidity frame, bedplate (steel C45), 4 symmetrical pillars, top high-rigidity frame and a lower w el ded steel f rame. A ctu ation syst em pow ered by a B rus hl es s motor combined with a ultra high-load capacity screw system. F u l l Programmable-Ram-Motion, with a 4 step cycle where different speeds, positions, accelerations and delays can be programmed. The system is suitable for the production of Wrinkle-walls, Smooth-wall and Paper food packaging trays. Thanks to the unique...

TYPICAL PRODUCTION CAPACITY (BASED ON A 5 CAVITY MOULD) : TYPICAL MOLD CHANGE SETUP ON THE PRESS IS DONE ELECTRONICALLY AND STORED IN THE TOUCH PANEL, NO MECHANICAL TYPICAL STAKING UNIT CHANGE SETUP: 5/10 MIN. ONE OPERATOR ONLY IS REQUIRED FOR THE RUNNING OF THE MACHINE.

LOWER INTERVAL OF MOULD MAINTENANCE LOWER NOISE IN THE PRODUCTION DEPARTMENT LESS ENERGY CONSUMPTION LOWER VIBRATIONS ON THE MOULD AND ON THE FLOOR HIGHER SAFETY FOR THE MACHINE OPERATORS LESS SKILLS REQUIRED TO THE OPERATORS FOR A PROPER HIGH-SPEED MACHINE SETUP LONG TERM INVESTMENT, THE PRESS IS ABLE TO HANDLE MOULDS THAT ARE NOT INVENTED AT THE MOMENT. A COMPLETE OVERHAULING OF THE PRESS CAN BE PERFORMED IN SOME HOURS, THANKS TO THE PARTICULAR DESIGN OF THE COMPONENTS AND THE FEW PARTS THAT ARE MOVING.

FLEXIBILITY MEANS NET PROFITS Have you ever thought about the coverage 100% OF THE PACKAGING SOLUTIONS IN ALUMINUM (wrinkle wall, smooth wall, semi smooth wall, airline, pet food, Nespresso cups) and in paper (wrinkle wall, smooth wall, tray forma) ? To achieve this level of production probably you need to invest a lot of money in a lot of different machines, in big places and in workforce! And if we are able to provide you a machine that can give you the possibilities to cover the whole range of the aluminum and paper trays production in combination with the highest reduction of costs for...

ADDITIONAL OPTIONS/FEATURES NOISE SHIELD COVER WITH DUAL POLYCARBONATE LAYER TRANSPARENT DOORS* SELF MOLD RECOGNITION SYSTEM The protection system of the servo CNC-1000 press and the doublelayer transparent polycarbonate doors are structures that well as protect the operator during operation of the press, are sound absorbent to reduce the noise and improve the comfort of the working environment. The system of automatic recognition of the mold communicate to the press the default program for the use of the same as well is used to store statistical data of the mold that help in the scheduled...

PROPORTIONAL SENSORS ON TANKS FOR DYNAMIC PRESSURE RELEASE (ANTI-PEAK) The sensor are placed on the anti-peak reservoir tanks and are specifically designed to improve the performance on smoothwall aluminium trays production. These sensor allow a dynamic control of the pression on the air-tank and drive automatically a loading solenoid, this is extremely heplpfoul in high depth smooting, low thikness, inconstant lubrication problems. OPTION REFRIGERATION ELECTRICAL PANEL In countries where high ambient temperature (over 35° Celsius) are usual we recommend to install a cooling system for the...

MONO CAVITY MOLD MULTI CAVITIES MOLD WRINKLE-WALL SMOOTH-WALL PAPER TRAY NOISE SHIELD COVER WITH DUAL POLYCARBONATE LAYER TRASPARENT DOORS “C” SHAPED PROTECTION OUTPUT PARTS SIDE WITH PHONO ABSORBING AND UPWARD OPEN PNEUMATIC CONTROL THROUGH 8+3 SERVOVALVES INDIVIDUAL CAVITY CONTROL WITH SYNC SOLENOID 8X3 REMOTE TELE-SERVICE CONNECTION WITH INTERNET ACCESS SELF MOULD RECOGNITION SYSTEM SENSORS PROPORTIONAL ON TANKS FOR RELEASE PRESSURE DYNAMIC (ANTI-PEAK) EXTRACTABLE PRESS BEDPLATE FOR FAST MOULD CHANGE SLOW MOTION CAMERA OPTION REFRIGERATION ELECTRICAL PANEL PAPPER MOULD TEMPERATURE...

VERTICAL ACTUATOR PERFORMANCE Peak pressing power Maximum travel stroke Maximum foil width Minimum mould closed height Linear speed at maximum power Maximum linear speed Linear maximum acceleration Positioning precision Default RAM Cycle positioning steps PNEUMATIC SYSTEM Generic use programmable solenoids Syncronism use programmable solenoids TECHNICAL SPECIFICATION Pression setting Electronic servo valve FEEDING SYSTEM PERFORMANCE Motor system Servo Brushless motor Maximum linear speed Linear pulling power Mechanical system Height level adjust Electrical screw actuator Motor distance...

ALUMINUM WRINKLE-WALL ALUMINUM SMOOTH-WALL PAPER TRAYS ANISTEK MECHATRONIC

The servo presses have the highest flexibility to run all the known kind of molds technology:  Traditional wrinkle wall, typical application in take away market  Multi compartment trays, used into ready meal industry (smooth wall technology) and restoration (army, self-service, take away, etc…) with wrinkle wall (G and L rims) finishing. Top automatic sealable smooth wall, always more used into ready-meal industry Deep draw, a specific technology to reach high ratio between Base dimension and total height of the tray Pharmaceutical capsule application Tea candle, worldwide popular as...

Paper plates, like used in party and generally single-use eco-friendly disposable  Paper bakery trays, similar to wrinkle-wall has same application and can replace them as basic packaging  Muffins cups in traditional round and also fastopening wrap design Paper mini cups, as used in fast-food to collect small portion of ketchup and mayonnaise or any other kind of top-up from self-dispenser machines Anything new that your fantasy and your market is going to demand! The possibility to add more steps into the forming to obtain new shapes and features of design that was completely impossible...

MACHINE LAYOUT ANISTEK MECHATRONIC Electric panel AIR Input AIR Input Electrical Input Electrical Input Electric panel Staker Collection table belt Mold loading This drawing is properly of Anistek Mechatronic GmbH. All rights reserved.