The Anhydro dosing system enables exact dosing of gas (e.g. N2) or any liquid (e.g. C02) into the feed line of the spray drying plant. The system is available in three variations - L for liquids, G for gases and L/G for both liquids and gases. Benefits • Homogeneous density • Precision control of end product • High and low dosing capacities • High accuracies - even in dosing rates as low as 50 g C02/h • Three control modes - manual, fixed flow rate and proportional flow rate • Available from 3 bar up to 500 bar (standard 300 bar) • Optimized PLC integration • Dosing after the high pressure pump (high pressure dosing) • Simple installation and operation • Minimum maintenance requirements • Compact and mobile design BULK DENSITY COLOURS (PRODUCT WHITENING) PARTICLE SIZE AND SHAPE REDUCED PRESSURE COFFEE COFFEE WHITENER CAPPUCCINO (BASIC MATERIAL) ICE COFFEE (90% SUGAR) SWEETENER BABY FOOD MALT AND MIXED MALT PRODUCTS OVOMALTINE CHOCOLATE DRINK CARAMEL COCOA DRINK MILK POWDER AND MILK BASIC PRODUCTS SUGAR PRODUCTS PLANT EXTRACTS

The Anhydro dosing system is equipped with a dual supply inlet High Pressure CO2 Injection Into Milk Concentrate for gas and/or a dual supply inlet for liquid which enable(s) The ability of CO2 to lower milk powder bulk density is governed switching between the two gas supply tanks or the two liquid by the solubility of the CO2 gas in the water component of supply tanks without interruption. When supplied, the gas or liquid the milk concentrate. The dissolved CO2 is released from the is filtered and CO2 is passed through a cooling aggregate for water component at the point of atomization, forming...