Catalogs >
Anhui Union Brush Industry Co., Ltd. >
Pipeline Cleaning Brush

Pipeline Cleaning Brush
2Pages

Catalog excerpts

It is principally used for cleaning and dredging oil stains on the inner wall of oil pipelines or dirt on the inner wall of natural gas pipelines, and is convenient for smooth transportation. The brush is made of magnetically conductive steel wire, and the magnetic conductivity of steel wire is excellent. The thickness can be selected as 0.2MM, 0.3MM, 0.5MM, etc, and the manufacturing process is single steel strip (small-bore steel brush)/double steel strip (large-bore steel brush) internal welding. Steel brushes with corresponding outer diameters are customized based on various transportation pipelines, the minimum internal diameter of the steel brush can be controlled at about 80MM, and the maximum internal diameter can reach 1.55m (outer diameter about 1.8m). Working principle of pipeline cleaning brush Functions of pipe! ne cleaning brush Characteristics of pipeline cleaning brush The front end consists of support plate, sealing straight plate and spacer sleeve, which can play the roles of pigging, drainage, water blocking, isolation, etc.; With steel skeleton as the main body, it is equipped with 1 support plate, 1 wire brush, 2 sealing plates and 2 packing leathers. It boasts fairly good sealing and wear resistance. It is easy to assemble and can replace the support plate, wire brush, straight plate and packing leathers. The product can carry an electronic tracking system to monitor the running status of the pig based on the design requirements. Thsteel wire wheel brushes are used in the middle to remove iron oxide and scaling on the inner wall ofthe pipeline; e front end consists of support plate, sealing straight plate and spacer sleeve, which can play the roles of pigging, drainage, water blocking, isolation, etc; The rear end adopts two packing leathers, which can play the roles of pigging, supporting and sealing; Cleaning, descaling, water removal, wax scraping, detection, sealing, hydrostatic test and fluid isolation of pipelines. We are not only a brush roller manufacturer, but more of a service provider of brush roller technology.

Open the catalog to page 1

Natural gas pipelines in operation: removing corrosive substances such as accumulated water, light oil, methane hydrate, iron oxide, carbide dust, carbon disulfide, hydrosulfuric acid, etc. in the pipeline; reducing the corrosion damage of corrosive substances to the inner wall of the pipeline; re-defining the pipeline direction; detect pipeline deformation; checking the valve integrity rate along the line; reducing working back pressure 03 04 05 Crude oil pipeline in operation: pigging before in-line inspection, pigging for low throughput intermittent operation of oil pipeline; removing...

Open the catalog to page 2