CBB61
CBB61
The document describes capacitors made of metallized polypropylene film, filled with flame retardant epoxy resin, housed in a square plastic case, and equipped with cable or quick connecting terminals. These capacitors are suitable for starting and running AC single-phase motors.
Capacitors should not be exposed to direct sunlight, rain, or snow. They are suitable for altitudes up to 2000 meters, with residual voltage not exceeding 10% of the rated voltage, and can operate in lightly polluted atmospheres.
Maximum permissible voltage is 1.1 times the rated voltage, and maximum permissible current is 1.3 times the rated current. Overloads should not exceed 1.35 times the rated output.
The capacitors are certified by CQC, TUV, and UL/CUL.
Rated voltages range from 200VAC to 500VAC, with a frequency of 50/60Hz and a capacitance tolerance of ±5%. The test voltage between terminals is 2Un for 2s and 60s, and between terminal to case is 3000Vac for 2s and 60s. The dissipation factor is ≤0.0020 at 100Hz, and the insulation resistance is R·C≥3000MΩ·μF(s). Operating temperature ranges from -40℃ to +70/+85℃.
Capacitors are packed in double corrugated paperboard boxes and should be stored at temperatures between 10~38℃ with relative humidity less than 70% for up to twelve months.
Components include multi-strand copper wire terminals, ABS/PBT shell, safety metallized polypropylene film, black flame-retardant epoxy resin, and zinc spraying layer.
For additional information, refer to IEC60252 and UL810 or contact sales representatives for special requests.
Dimensions vary based on voltage and capacitance, with detailed measurements provided for each specification.
Catalog excerpts
1. Scope The capacitors are made of metallized polypropylene film and filled with flame retardant epoxy resin in a square plastic case (match-box) and leaded with cable or quick connecting terminals. It is suitable for starting and running of AC single-phase motors. 2. Service conditions The capacitor should be prevented from exposing in sunlight directly and rain or snow will cause fall of insulation between terminals and terminals to case of the capacitor. Followings are detailed service conditions. 2.1 Altitude: Not exceeding 2000 meter. 2.2 Residual voltage while loading: Not exceeding 10% rated voltage. 2.3 Pollution: The capacitors are suitable to operating in lightly polluted atmospheres. 3.Overloads 3.1 Maximum permissible voltage Not exceeding 1.1 times the rated voltage. 3.2 Maximum permissible current Not exceeding 1.3 times the current that occurs at rated sinusoidal voltage and rated frequency. 3.3 Maximum permissible reactive output The overloads resulting from operation at voltage and current exceeding the rated values (even though within the limits indicated in 3.1 and 3.2) should be less than 1.35 times the rated output. 4.Capacitor certificates This capacitor has certificates of CQC TUV\ UL/CUL. 5. Properties
Open the catalog to page 1All Anhui Tongfeng Electronics Co.,Ltd. catalogs and technical brochures
- Film capacitor
- Roll sheet
- Transparent film
- Cylindrical capacitor
- Packaging foil
- Switching power supply capacitor
- Protective sheet
- Electrolytic capacitor
- Self-healing capacitor
- Industrial capacitor
- Stretch film
- Radial capacitor
- Film for the electronics industry
- Printable film
- PET foil
- Aluminum capacitor
- Encapsulated capacitor
- Electric motor capacitor