• Vibration Measurement: Acceleration, velocity, and displacement can be measured synchronously with a range of 80g for acceleration, 200mm/s for velocity, and 10mm for displacement. The accelerometer sensitivity is 100mv/g.
• Power Supply: 4mA at 24V constant current supply for IEPE accelerometer.
• Data Acquisition: Utilizes a 24-bit delta-sigma ADC with a frequency range of 100Hz to 40kHz and a dynamic signal range of 110dB.
• Precision: Input range of ±10V with a precision of 1% (0.1dB).
• Frequency Response: 0.2dB from 10Hz to 5kHz; 0.5dB from 3Hz to 20kHz.

• Channels: 2 channels with isolation input for vibration and 4 channels for process information.
• Triggering: Compatible with TIL, Eddy current, and Hall sensors with a triggering level of 4V~30Vpp.
• Relay Output: 1 or 2 SPST, normally open or close.
• Data Storage: 4M bytes per channel with continuous acquisition capabilities.

• Interfaces: Supports TCPIIP, 10/100baseT, Optical (optional), RS232, RS485, and CANbus.
• Data Collector: Online data collector with 1G Bytes storage capacity.

• Dimensions and Weight: 300 x 400 x 167mm, weighing 9.8Kg.
• Protection: IP65 dust and water-proof rating.
• Operating Conditions: Temperature range from -40 to 70°C, humidity up to 95% RH without condensation.
• Power Requirements: Selectable input voltage 110-240VAC, 50-60Hz, <20W; 24VDC, 1.5A.

• Certifications: GL, CE certification.
• Immunity and Protection: Electrostatic discharge immunity EN61000-4-2, electrical fast transient burst immunity EN61000-4-4, surge protection EN61000-4-5, and lightning protection 20KA.

• Real-time dynamic display and automatic/manual data acquisition.
• Configuration information tree and remote data viewing.
• Intelligent alarm system with multiple report formats.

The product is designed to enhance industrial processes through advanced data acquisition and analysis capabilities.