750W Slim Type with PFC Switching Supply UHP-750 series EHE CBC€ IEC62368-1 ■ Applications • Industrial automation machinery • Industrial control system • Mechanical and electrical equipment • Electronic instruments, equipments or apparatus • Household appliances ■ Features • Slim and Low profile (41mm) • Fanless design, 750W convection • Withstand 300VAC surge input for 5 seconds • Built-in active PFC function • -30~+70°C working temperature • Protections: Short circuit / Overload / Over voltage / Over temperature • DC OK relay contact • Operating altitude up to 5000 meter (Note.6) • LED indicator for power on • 3 years warranty ■ Description UHP-750 series is a 750W single-output slim type power supply with 41mm of low profile design. Adopting the full range 90~264VAC input, the entire series provides an output voltage line of 12V, 24V,36V and 48V. In addition to the high efficiency up to 96%, that the whole series operates from -30C ~ 70C under air convection without fan. UHP-750 has the complete protection functions and 5G anti-vibration capability ; It is complied with the international safety regulations such as TUV EN62368-1 and UL62368-1. UHP-750 series serves as a high performance power supply solution for various industrial applications. ■ Model Encoding File Name:UHP-750-SPEC 2018-04-26 Competitive sensor Et power supply solut

750W Slim Type with PFC Switching Supply UHP-750 series SPECIFICATION MODEL Competitive sensor & power supply solutions worldwide

750W Slim Type with PFC Switching Supply BLOCK DIAGRAM POWER SWITCHING DETECTION CIRCUIT RECTIFIERS & FILTER STATIC CHARACTERISTIC DERATING CURVE Contact Open PSU turns off/DC fail Contact Rating(max.) Contact Close

MW I MEAN WELL I 750W Slim Type with PFC Switching Supply UHP-750 seri es MECHANICAL SPECIFICATION HPCPCKKPPPPKKKKPlPPKP^ kkkkkkkkhk><kkhkj TB1 3 2 1 HmKkkkkhKkHkKkw H<^HW=PrPKO AC Input Terminal(TBI) pin NO.Assignment Competitive sensor Et power supply solutions worldwide

I MEAN WELL! 750W Slim Type with PFC Switching Supply UHP-750 series Operate with additional aluminum plate In order to meet the“Derating Curve”and the “Static Characteristics”, UHP-750 series must be installed onto an aluminum plate(or the cabinet of the same size) on the bottom.The size of the suggested aluminum plate is shown as below. And for optimizing thermal performance, the aluminum plate must have an even and smooth surface (or coated with thermal grease), and UHP-750 series must be firmly mounted at the center of the aluminum plate. unit:mm ■ INSTALLATION MANUAL Please refer to : http://www.meanwell.com/manual.html...

Headquarter Switzerland: Pewatron AG Thurgauerstrasse 66 CH-8050 Zurich Phone +41 44 877 35 00 [email protected] Office Germany: Pewatron Deutschland GmbH EdisonstraEe 16 D-85716 UnterschleiEheim Phone +49 89 374 288 87-0 [email protected] PEWATRON 5ENS0R5 • POWER SOLUTIONS We are here for you. Addresses and Contacts. Sales Germany & Austria Postcode 00000 - 31999 Postcode 38000 - 39999 Postcode 80000 - 99999 Austria Kurt Stritzelberger Phone + 49 89 260 52 80 Mobile + 49 171 803 41 35 [email protected] Geometrical sensors Sensor elements Thorsten Ravagni Phone +49 60 479 53...