MW 200W Reliable Green Medical Power Supply RPS-200 series ■ Features • 4"x2" compact size • Medical safety approved (2 x MOPP) according to ANSI/AAMI ES60601-1 and IEC/EN60601-1 * Suitable for BF application with appropriate system consideration • 140W convention, 200W force air • EMI Conduction for Class B Radiation for Class B with FG(Class I) and Class A without FG(ClassII) • No load power consumptions.5W • Extremely low leakage current • 12V/0.5A fan supply • Protections: Short circuit / Overload / Over voltage /Over temperature • Lifetime > 65K hours • Operating altitude up to 5000 meters • 3 years warranty ■ Description RPS-200 is a 200W highly reliable green PCB type medical power supply with a high power density (21.9W/irf) on the 4” by 2” footprint. It accepts 80~264VAC input and offers various output voltages between 12V and 48V. The working efficiency is up to 95% and the extremely low no load power consumption is down below 0.5W. RPS-200 is able to be used for both Class I (with FG) and Classn(no FG) system design. The extremely low leakage current is less than 130M- In addition, it conforms to the international medical regulations (2*MOPP) and EMC EN55011, perfectly fitting all kinds of BF rated “patient contact” medical system equipment. Rated wattage Series name Competitive sensor Et power supply solutions

MW I MEAN WELLl SPECIFICATION 200W Reliable Green Medical Power Supply RPS-200 series MODEL 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 nf & 47//f parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltages. Please check the derating curve for more details. 5. Touch current was measured from primary input to DC output. 6. The ambient...

200W Reliable Green Medical Power Supply RPS-200 series ■ Block Diagram fosc: 65KHz ■ Output Derating VS Input Voltage AMBIENT TEMPERATURE (°C) Competitive sensor St power supply solutions worldwide

200W Reliable Green Medical Power Supply RPS-200 series ■ Mechanical Specification • RPS-200 (PCB Type) Competitive sensor Et power supply solutions worldwide

200W Reliable Green Medical Power Supply RPS-200 series • RPS-200-C (Enclosed Type) Side View Side View side View Top View Side View Competitive sensor & power supply solutions worldwide

200W Reliable Green Medical Power Supply RPS-200 series AC Input Connector (CN1): JSTB3P-VH or equivalent >&Note: 1. The FAN supply is designed to serve as the source of the additive external fan for the cooling of the power supply, enabling the full load delivery and assuring the best life span of the product. Please do not use this FAN supply to drive other devices. 2.The PCB type(Blank type)EMI Conduction for Class B. Radiation for Class B with FG(Class I) and Class A without FG(ClassII) 3.The enclosed type(-C type) model is not suitable for the configuration within a Class II (no FG) system...

Office Germany: Pewatron Deutschland GmbH EdisonstraEe 16 D-85716 UnterschleiEheim Phone +49 89 374 288 87-0 [email protected] PEWATRON 5ENS0R5 • POWER SOLUTIONS Geometrical sensors Sensor elements Thorsten Ravagni Phone +49 60 479 53 627 [email protected] Sales Other Countries / Product Management Pressure Sensors Gas sensors / Gas sensor modules Load cells Dr. Thomas Clausen Phone + 41 44 877 35 13 [email protected] Flow / Level / Medical products Linear position sensors Angle sensors Eric Letsch Phone + 41 44 877 35 14 [email protected] Accelerometers / Level...