General description PHPS-7500 is a new generation of ceramic pressure sensors made with low-temperature cofired ceramic (LTCC) technology and a patented sensor-construction solution. The pressure sensor element is made with LTCC technology using piezo-resistive principle to detect the pressure. The LTCC material is compatible with many types of aggressive media like water, hydraulic oils, diesel and others, which makes the sensor suitable for pressure measurements in harsh environments. Special protection of the piezo-resistors also makes this sensor suitable for wet-wet applications. High performance and accuracy are achieved with the patented sensor construction, which allows this sensor to be used in many applications, and with its compact and convenient design it is very suitable for OEM users. The PHPS-7500 pressure sensors are amplified and temperature compensated from 0 to 70°C with special signal conditioning electronics. The PHPS-7500 family consists of standard 100 mbar, 350 mbar, 1 bar, 2bar, 4bar and 10 bar differential pressure ranges. • Suitable for harsh environment and wet-wet applications • Single 5V supply voltage • Wide compensated range (0-70°C) • Total accuracy down to 0.75%FS (typ.) over 0-70°C, all effects included. • Standard 0.5 - 4.5V voltage output and digital I2C output available (pressure & temperature) • High performance OEM Applications Pressure measurements of gases and liquids Instrumentation & measuring equipment Process control Level control systems HVAC Leak detection Competitive sensor & power supply solutions worldwide

Available types overview TAmb=25°C, Vcc = 5V unless otherwise noted. Competitive sensor & power supply solutions worldwide

Competitive sensor & power supply solutions worldwide

PHPS-7500 OEM Ceramic Pressure Transducer Specification notes 1) Over pressure is the maximum pressure which may be applied without causing damage to the sensing element. 2) Burst pressure is the maximum pressure which may be applied without causing leakage damage to the sensing element. 3) Analog output signal is ratiometric to power supply Vcc digital signal is not ratiometric to the power supply. 4) Offset voltage is the voltage output at zero pressure. 5) Full scale output is the voltage output at full pressure range. 6) Full scale span is the algebraic difference between the output at full...

Other configurations possible on special request. Competitive sensor & power supply solutions worldwide

Office Germany: Pewatron Deutschland GmbH EdisonstraEe 16 D-85716 UnterschleiEheim Phone +49 89 374 288 87-0 [email protected] PEWATRON 5ENS0R5 • POWER SOLUTIONS Geometrical sensors Sensor elements Thorsten Ravagni Phone +49 60 479 53 627 [email protected] Sales Other Countries / Product Management Pressure Sensors Gas sensors / Gas sensor modules Load cells Dr. Thomas Clausen Phone + 41 44 877 35 13 [email protected] Flow / Level / Medical products Linear position sensors Angle sensors Eric Letsch Phone + 41 44 877 35 14 [email protected] Accelerometers / Level...