Features ■ Compact structure, exquisite appearance ■ Digital circuit processing ■ High precision, high stability ■ Strong anti-interference, good long-term stability ■ Small size, light weight, easy installation and use ■ Wide measuring range, can measure absolute pressure, gauge pressure and sealed gauge pressure ■ Multiple process connection and electrical connection options ■ Suitable for mass production, economic and reliable Applications ■ Hydraulic and pneumatic equipment ■ Chemicals and Chemical Industry ■ Compressor ■ Inkjet printer Notes: 1 Do not touch the diaphragm with hard objects, which may cause damage to the diaphragm. 2 Please read the Instruction Manual of the product carefully before installation and check the relevant information of the product. 3 Strictly follow the wiring method for wiring, otherwise it may cause product damage or other potential faults. 4 Misuse of the product may cause danger or personal injury. Product overview PEWA200 pressure transmitter is designed with a compact integrated stainless steel structure with a built-in digital processing circuit that converts the millivolt signal of sensor into standard voltage or current signal output. The structures and output forms are various. PEWA200 is featured with small size, light weight, easy installation and use, and stable performance. It is widely used in industrial automation equipment and has good adaptability to various complicated environments. Notes: 1 Do not misuse documentation. 2 The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. 3 Complete installation, operation, and maintenance information is provided in the instructions of the product. 4 Misuse of the product may cause danger or personal injury. Performance parameters Pressure range Pressure reference Accuracy Total Error Band Gauge pressure, Absolute pressure, Sealed gauge pressure 0.5%FS typ., 0.7%FS max. (incl. non linearity, hysteresis and repeatability) 35kPa: ±2%FS (0°C~60°C) (incl. non linearity, hysteresis, repeatability and temperature drift) Other ranges: ± 1.5%FS (-20 °C~85 C) (incl. non linearity, Hysteresis, Repeatability and temperature drift) Competitive sensor & power supply solutions worldwide

Performance parameters(cont.)l Output and power supply Electrical connection & wiring method Connector code J7: Round Packard Dimension In mm Connection mode IP65 Red: Supply+ Green: Current _IP65_ Pin 1: Supply+ Pin 2: Current output Competitive sensor & power supply solutions worldwide

Application Cavitation, liquid hammer and pressure peak may occur in air or hydraulic systems with varying flow rates, such as the rapid closing of valve or the start and stop of pump. Even at relatively low operating pressures, these problems may occur at the entrance and exit. Media condition Damper In the liquid containing particles, nozzle clogging may occur. The vertical mounting of pressure transmitter minimizes the risk of clogging because the flow of fluid happens in initial start only, the volume of the rear of the nozzle is fixed and the nozzle has a relatively large aperture (1.2 mm)....

Pressure port(cont.) Thread code torque Note: Torque depends on various factors such as material of gasket, supporting materials, lubrication of thread and pressure. Pressure range selection Note: G stands for gauge pressure, A, absolute pressure, S, sealed gauge pressure. Competitive sensor & power supply solutions worldwide

Refer to “Application of damper” Imported connector OMAL Round Packard connector male DuPont material J3: Cable outlet J4: M12 J6: Mini 4 pin J7: Round Packard Product model Refer to “Pressure range selection” G = Gauge pressure A = Absolute pressure S = Sealed gauge pressure

Example: PEWA200-35kGB1C3J3 Refer to product model PEWA200, with pressure range 0~35kPa, pressure reference gauge pressure, output signal 4~20mA, pressure port G1/4, electrical connection cable outlet. Ordering tips: Ensure compatibility between measured media and contacting part of product when placing an order. Competitive sensor & power supply solutions worldwide

Headquarter Switzerland: Pewatron AG Thurgauerstrasse 66 CH-8050 Zurich Phone +41 44 877 35 00 [email protected] Office Germany: Pewatron Deutschland GmbH EdisonstraEe 16 D-85716 UnterschleiEheim Phone +49 89 374 288 87 00 [email protected] PEWATRON 5ENS0R5 • POWER SOLUTIONS We are here for you. Addresses and Contacts. Sales Germany & Austria Geometrical sensors Other products Kurt Stritzelberger Phone + 49 89 374 288 87 22 [email protected] Pressure sensors Other products Gerhard Vetter Phone + 49 89 374 288 87 26 [email protected] Sales Switzerland & Liechtenstein...