*mydirectindustry

APBR30X75

Product catalog summary

Motor Models and Variants

The document covers specifications for several permanent magnet brush DC motor models, including 42ZYT01A series (12V, 24V, 40V variants) and APBR30x75 model. These motors are designed for various voltage and torque requirements.

Technical Specifications

Shaft Material: 3Cr13 stainless steel with hardness HRC 36~40.
Bearing: High-quality ball bearing for durability and smooth operation.
Magnet: Hard ferrite magnet with 2 poles.
Protection Class: IP50, providing basic protection against dust and limited ingress of water.
Insulation Class: Class F, supporting operating temperatures from -40℃ to +140℃.
Certifications: CE and RoHS compliant.

Electrical and Mechanical Parameters

Parameter	12V	24V	40V
Continuous Rated Speed (rpm)	3500	3500	3500
Continuous Rated Torque (mN.m)	20	20	20
Continuous Current (A)	1.0	0.5	0.3
Starting Torque (mN.m)	125	125	125
Starting Current (A)	4.7	2.2	1.3
No Load Speed (rpm)	4200	4200	4200
No Load Current (A)	0.18	0.12	0.08
Weight (g)	240	240	240
Motor Length (mm)	75	75	75

Additional Motor Variant Specifications (APBR30x75)

Rated voltages: 12V, 24V, 40V with speeds around 3400-3700 rpm.
Continuous torque approximately 38-39 mN.m.
Continuous current ranges from 0.6A to 1.9A depending on voltage.
Weight approximately 390g, motor length 70mm.

Options and Customizations

The motors can be customized for voltage, winding, shaft, mounting, and lead wire configurations. Additional options include EMI/RFI suppression circuits, thermal protection, and high-temperature Class H insulation.

Mechanical Drawings and Dimensions

Dimensions are provided in millimeters with tolerances, including shaft diameter and motor length. Lead wire specifications include AWG18 UL3266 with lengths around 300±20 mm.

Performance Characteristics

Characteristic torque vs. speed diagrams and starting torque/current data are included, indicating motor performance under various loads and voltages.

Contact and Support Information

The document lists detailed contact information for Pewatron AG headquarters in Switzerland and offices in Germany, including specialized contacts for various sensor and power supply product lines, sales regions, and technical support.

Critical Information Summary

Motors operate reliably within -40℃ to +140℃ temperature range.
Protection class IP50 ensures moderate environmental resistance.
High-quality materials and certifications ensure compliance and durability.
Customization options allow adaptation to specific application needs.
Comprehensive technical data supports design and integration.

Catalog excerpts

Permanent Magnet Brush DC Motor ABPR30x75 Motor Specifications Shaft materials 3Cr13, HRC 36~40 High quality ball bearing Hard ferrite magnet, 2- poles Protection class IP 50 Insulation class: F, operating temperature range:-40°C~+140°C CE and ROHS certified Options Customized voltage, winding, shaft, mounting, and lead configurations EMI/RFI suppression circuit; Thermal protection, high temperature Class H insulation Characteristic diagram

Open the catalog to page 1

Office Germany: Pewatron Deutschland GmbH EdisonstraEe 16 D-85716 UnterschleiEheim Phone +49 89 374 288 87-0 [email protected] PEWATRON 5ENS0R5 • POWER SOLUTIONS Geometrical sensors Sensor elements Thorsten Ravagni Phone +49 60 479 53 627 [email protected] Sales Other Countries / Product Management Pressure Sensors Gas sensors / Gas sensor modules Load cells Dr. Thomas Clausen Phone + 41 44 877 35 13 [email protected] Flow / Level / Medical products Linear position sensors Angle sensors Eric Letsch Phone + 41 44 877 35 14 [email protected] Accelerometers / Level...

Open the catalog to page 2