Analog Output, Barbed Port Semiconductor Pressure Sensor Description The APB2 pressure sensor series is composed of a silicone piezoresistive pressure sensing chip and a signal conditioning integrated circuit. The low-level signal from the sensing chip is amplified, temperature compensated, calibrated and finally converted to a high level analog output voltage that is proportional with the applied pressure. The APB2 series measures gauge pressure.  Amplified and temperature compensated analog output  Barbed port  High accuracy ±1.5 %FS  Supply voltage 3.0, 3.3 & 5.0 Vdc  Low supply current Max 2 mA at 3.3 Vdc  Operating temperature -40 to 125℃  Wide compensated temperature 0 to 85℃  Pins compatible with Fujikura’s XFPM integrated pressure sensor  Customization available Battery-operated Devices Medical Devices Industrial Pneumatic Devices Consumer Devices RoHS Compliant Device Lineup Model Pin Pressure Direction Type Supply Voltage © 2014 Fujikura Ltd. All rights reserved. This data sheet has a possibility to be revised without notice. This data sheet does not contain all information. Before designing, please ask us the specifications of this product.

Analog Output, Barbed Port Semiconductor Pressure Sensor Device Name Code Sensor Code Pressure Code APB2 0 R - 025K G Pressure type G: Gauge/Positive V: Gauge/Negative W: Gauge/Bi-pressure Model Supply voltage 0: 5.0 Vdc 1: 3.3 Vdc 2: 3.0 Vdc Pin direction R: Opposite N: Normal Block Diagram Temp Sensor Pre-Amp Sensor Bridge Input Pressure © 2014 Fujikura Ltd. All rights reserved. This data sheet has a possibility to be revised without notice. This data sheet does not contain all information. Before designing, please ask us the specifications of this product.

Supply Voltage Load Pressure Operating Temperature Storage Temperature VDDmax Pmax+ Topt Tstg See Pressure Range Table -40 to +125 -40 to +125 General Specifications Item Pressure Range Electrical Characteristics Load resistor RL =^, Ambient temperature Ta = 25°C © 2014 Fujikura Ltd. All rights reserved. This data sheet has a possibility to be revised without notice. This data sheet does not contain all information. Before designing, please ask us the specifications of this product. Competitive sensor & power supply solutions worldwide

Analog Output, Barbed Port Semiconductor Pressure Sensor Package Dimensions Land pads Hole for Pressure Port Diameter is depending on your design. © 2014 Fujikura Ltd. All rights reserved. This data sheet has a possibility to be revised without notice. This data sheet does not contain all information. Before designing, please ask us the specifications of this product.

Office Germany: Pewatron Deutschland GmbH EdisonstraEe 16 D-85716 UnterschleiEheim Phone +49 89 374 288 87-0 [email protected] PEWATRON 5ENS0R5 • POWER SOLUTIONS Geometrical sensors Sensor elements Thorsten Ravagni Phone +49 60 479 53 627 [email protected] Sales Other Countries / Product Management Pressure Sensors Gas sensors / Gas sensor modules Load cells Dr. Thomas Clausen Phone + 41 44 877 35 13 [email protected] Flow / Level / Medical products Linear position sensors Angle sensors Eric Letsch Phone + 41 44 877 35 14 [email protected] Accelerometers / Level...