Digital Output Semiconductor Pressure Sensor Description The AP4 pressure sensor series is composed of a silicon piezoresistive pressure sensing chip and a signal conditioning integrated circuit. The low-level signal from the sensing chip is amplified, temperature compensated, calibrated and finally converted to digital data that is proportional with the applied pressure. The AP4 series measures gauge pressure. Digital output High accuracy ±1.5 %FS Supply voltage 3.0, 3.3 & 5.0 Vdc Low supply current Max 3.5 mA at 3.3 Vdc Operating temperature -40 to 125℃ Wide compensated temperature 0 to 85℃ Package compatible with Fujikura’s XFPM integrated pressure sensor  Customization available Battery-operated Devices Medical Devices Industrial Pneumatic Devices Consumer Devices RoHS Compliant Device Lineup Model Pin Pressure Direction Type Supply Voltage © 2013 Fujikura Ltd. All rights reserved. This data sheet has a possibility to be revised without notice. This data sheet does not contain all information. Before designing, please ask us the specifications of this product.

Digital Output Semiconductor Pressure Sensor Device Name Code Sensor Code Pressure Code - STICK Packing style Blank: Tray STICK: Stick Model Pressure type G: Gauge/Positive V: Gauge/Negative W: Gauge/Bi-pressure Slave address code 2: 0x28 Pin direction N: Normal R: Opposite Block Diagram Temp Sensor Pre-Amp Sensor Bridge Min. Popt Input Pressure © 2013 Fujikura Ltd. All rights reserved. This data sheet has a possibility to be revised without notice. This data sheet does not contain all information. Before designing, please ask us the specifications of this product.

Absolute Maximum Ratings General Specifications Item Pressure Range Item Electrical Characteristics Ambient temperature Ta = 25°C From Master to Slave From Slave to Master | From Slave to Master From Master to Slave From Master to Slave Measurement Packet 0 Start Condition 0 Stop Condition | | Slave Address | | Data Bit © 2013 Fujikura Ltd. All rights reserved. This data sheet has a possibility to be revised without notice. This data sheet does not contain all information. Before designing, please ask us the specifications of this product. r Fujikura Competitive sensor & power...

Digital Output Semiconductor Pressure Sensor Package Dimensions Hole for Pressure Port Diameter is depending on your design. Land pads © 2013 Fujikura Ltd. All rights reserved. This data sheet has a possibility to be revised without notice. This data sheet does not contain all information. Before designing, please ask us the specifications of this product.

Office Germany: Pewatron Deutschland GmbH EdisonstraEe 16 D-85716 UnterschleiEheim Phone +49 89 374 288 87-0 [email protected] PEWATRON 5ENS0R5 • POWER SOLUTIONS Geometrical sensors Sensor elements Thorsten Ravagni Phone +49 60 479 53 627 [email protected] Sales Other Countries / Product Management Pressure Sensors Gas sensors / Gas sensor modules Load cells Dr. Thomas Clausen Phone + 41 44 877 35 13 [email protected] Flow / Level / Medical products Linear position sensors Angle sensors Eric Letsch Phone + 41 44 877 35 14 [email protected] Accelerometers / Level...