TTLM DESCRIPTION The TTLM series is an integrated-circuit based temperature transducer that outputs voltage proportional to the Centigrade temperature or Kelvin temperature. The TTLM is a very low power device which is why it has very low self heating of less than 0.1˚C in still air. Its compact size and amplified output are ideal for mobile equipment or engine monitoring applications. APPLICATIONS Rated for -67˚F to 302˚F (-55˚C to 150˚C) Less than 100 uA Current Drain Low self-heating Sensing Element: Precision IC Temperature Sensor Mobile equipment Hydraulic power units Lubrication system Engine Oil & Coolant Temp Ambient Temperature Range Supply Voltage / Current 12 - 24 VDC* Current Limited. See equation (1) Output Voltage Range Output Sensitivity Output Load Resistance Electrical Connection Wire Protection Nylon Split Loom (0.38 in) / Ø 9.9mm) Nylon Split Loom (0.38 in) / 9.9mm) Housing Material Pressure Rating Probe Diameter TEMPERATURE TRANSDUCER Temperature Range *Must be powered with a constant current source. The current source setting must consider the current in the sensor and the current in the load resistance. Dimensions SPLIT LOOM, THREAD: 3/8"-18 PTF SAE EXTERNAL THREAD PER ANSI B1.20.3 - DRY SEAL

TTLM Wiring Code WHITE (OUTPUT) BLACK (COMMON) BLACK (COMMON) TEMPERAURE TRANSDUCER Choose resistor (Rlim) that is nearest to the calculated value. A 0.25W to 0.5W Power Rating is required for the limiting resistor, Rlim Ordering Information 3/8”-18 PTF SAE External Thread (Per ANSI B1.20.3 - Dry Seal) with 1” (25 mm) probe length - Electrical Connection FLDT - Deutsch connector, DTM04-3P, 10” long leads Note: Different configurations to this series is available. Please contact Anfield Sensors Inc. for custom options.