KAPS / KAPF PRESSURE SWITCH DESCRIPTION The KAPS/KAPF is a piston pressure switch featuring an external adjustment knob to easily adjust set point. The switch is IP67 rated, enabling high performance in most outdoor conditions. It is excellent for hydraulic applications requiring long cycle life. APPLICATIONS Snap action micro switch Factory set or field adjustable Full metal stops High proof pressure Pressure Range 5A [12/24 VDC, 125 VAC/250 VAC] Optional: 10A or Gold Contact Electrical Switch Type Protection Adjustment Range Media Temperature Range Industrial equipment Scissor lifts Presses Cranes Ambient Temperature Range Mechanical Life Expectancy Piston Seal Housing Material Zinc Plated Steel Maximum Overpressure +/- 2% of full set point range at 20°C (68°F) ADJUSTMENT KNOB LOCKING MECHANISM DUAL 5/64" SET SCREW 1-1/8" HEX Wiring Code CONTACT FLYING LEADS FLWF / FLWM FLDR / FLDP FLCM / FLCF / FLPM / FLPF SPDT MODEL SPST MODEL SPDT MODEL SPST MODEL NORMALLY CLOSED NORMALLY OPEN UNLESS OTHERWISE SPECIFIED: PIN C PIN 2 DIMENSIONS ARE IN INCHES SURFACE FINISH: 125 MICROINCHES PIN B PIN 2 TOLERANCES: LINEAR: 0.X +/- 0.010 IN; 0.XX +/- 0.005 IN ANGULAR: +/- 0.5 NAME www.anfieldsensors.com DRAWN CHK'D DEBUR AND BREAK ALL SHARP EDGES UNLESS OTHERWISE SPECIFIED

KAPS / KAPF Ordering Information 1 Factory Preset - 1/4 NPT male - 7/16-20 SAE male, with O-ring seal - SPST (Normally Open) - SPST (Normally Closed) - SPDT (Single Pole Double Throw: Normally Open and Normally Closed) - Electrical Termination: FL FLWF FLWM FLDP FLDR FLCM FLCF FLPM FLPF Insert set point value XXX followed by: R, F, BR, or BF Adjustment Range - Pressure Selection Field Adjustable - Select Model Code PRESSURE SWITCH Field Adjustable Flying Flying Flying Flying Flying Flying Flying Flying Flying Lead Lead Lead Lead Lead Lead Lead Lead Lead 18” long, 18 AWG Weatherpack connector,...