ANEST IWATA Group MANUAL SPRAY GUNS .com Gravity or Pressure Spray Gun Cup available 600cc or 200 cc Reduced weight (about -20%) More manoeuvrability New air valve Fluid needle and fluid nozzle in stainless steel AISI 303 Fluid needle packing in PTFE New high atomization air cap sets Gun bodies coated in PTFE for easy cleaning Low air consumption Polyethylene cups with antidrop CERTIFICATE OF COMPLIANCE We certify that we have tested (Report Number: TE001) the Air Gunsa AZ 40 HTE Gravity Spray Gun manufactured by Air Gunsa s.r.l., in accordance with prEN 13966-1 Method 2 - tests for paint transfer efficiency (by weight) and that the spray gun complies with the requirements of the UK Environmental Protection Act 1990, Part 1 - 1997 Revision as detailed in PG6/34(97), PG6/23(97), PG6/40(94), PG6/41(94). Transfer efficiencies achieved with the materials detailed in the test report were: Water Based Base Coat 72.1% Max. Working Pressure: 7.0 bar (98 PSI) Noise Level (LAeqT) 75.6 dB (A) Temperature range: 5~40° C Air nipple: G 1/4” Fluid nipple: G 1/4” declaration of ATEX conformity for use in zone 1 and in zone 2 ANEST IWATA U.K. Ltd. Unit 10 Little End Road,Eaton Socon, St. Neots - Cambridgeshire - PE19 8Jh Tel. +44 (0) 1480 405419 Fax: +44 (0) 1480 217610 [email protected] www.anest-iwata.co.uk