- Catalogs
- Anest Iwata
- High Performance Spray Gun AZ 30 HTE
High Performance Spray Gun AZ 30 HTE
High Performance Spray Gun AZ 30 HTE
- Lightweight design, lighter than the AZ3HTE model.
- Integrated air valve mechanism and built-in air flow control valve.
- High-quality buffing finish body.
- Equipped with M&S CUP, including a paint filter.
- High Transfer Efficiency comparable to the AZ3HTE model.
- Low air consumption ranging from 200 to 300 litres per minute.
- Large and stable fan pattern due to the new design air cap.
- 1.0 mm nozzle: 245 Nl/min, 80 ml/min, 10 HP
- 1.3 mm nozzle: 245 Nl/min, 175 ml/min, 13 HP
- 1.5 mm nozzle: 250 Nl/min, 220 ml/min, 15 HP
- 1.8 mm nozzle: 270 Nl/min, 280 ml/min, 18 HP
- 2.0 mm nozzle: 270 Nl/min, 315 ml/min, 20 HP
- Maximum working pressure: 7.0 bar (98 PSI).
- Noise level: 73.5 dB (A).
- Operating temperature range: 5 to 40°C.
- Air and fluid nipple size: G 1/4”.
Catalog excerpts
ANEST IWATA Group MANUAL SPRAY GUNS AZ 30 HTE High Performance Spray Gun • Light weight (lighter than AZ3HTE) • Integrated air valve mechanism • Built in air flow control valve (standard) • High quality finished body (buffing finish) • Equipped with M&S CUP (incl. paint filter) • High Transfer Efficiency (the same level as AZ3HTE) • Low Air Consumption (200-300 litres/min) • Very large and stable fan pattern due to the new design air cap Max. Working Pressure: 7.0 bar (98 PSI) Noise Level (LAeqT) 73.5 dB (A) Temperature range: 5~40° C Air nipple: G 1/4” Fluid nipple: G 1/4” X CD CN declaration of ATEX conformity for use in zone 1 and in zone 2 ANEST IWATA U.K. Ltd. Unit 10 Little End Road,Eaton Socon, St. Neots - Cambridgeshire - PE19 8Jh Tel. +44 (0) 1480 405419 Fax: +44 (0) 1480 217610 [email protected] www.anest-iwata.co.uk
Open the catalog to page 1All Anest Iwata catalogs and technical brochures
MULTISPRAY MIX4 Pages
ULTRA SILENT1 Page
ELECTROSTATIC EQUIPMENT6 Pages
GENERAL CATALOGUE70 Pages
