MANUAL SPRAY GUNSAZ 3 HTE Gravity Spray Gun Light and Handy CERTIFICATE OF COMPLIANCE We certify that we have tested the Air Gunsa AZ3 HTE Gravity Spray Gun in accordance with prEN 13966-1 Method 2 - Tests for transfer efficiency and that this spray gun complies with the requirements of the Environmental Protection Act 1990, Part I - 1997 Revision as detailed in PG6/34(97), PG6/23(97), PG6/40(94), PG6/41(94). Transfer efficiencies achieved with the materials detailed in the test report were: PRIMER 93,8% Signed for MIRRC THATCHAM: <THE MOTOR INSURANCE REPAIR RESEARCH CENTRE Max. Working Pressure: 6.8 bar (98 PSI) Noise Level (LAeqT) 77.6 dB (A) Temperature range: 5~40° C Air nipple: G 1/4” Fluid nipple: G 1/4” declaration of ATEX conformity for use in zone 1 and in zone 2 ANEST IWATA U.K. Ltd. Unit 10 Little End Road,Eaton Socon, St. Neots - Cambridgeshire - PE19 8Jh Tel. +44 (0) 1480 405419 Fax: +44 (0) 1480 217610 [email protected] www.anest-iwata.co.uk