AZ 10 HTE SP/SP AV pressure spray gun

Product catalog summary

Introduction
The document provides technical specifications and compliance information for the Air Gunsa AZ 10 HTE Manual Spray Guns, distributed by ANEST IWATA U.K. Ltd. It highlights the features, compliance certifications, and technical parameters of the spray guns.

Key Features

Reduced weight by approximately 20% for enhanced manoeuvrability.
New air valve design and high atomization air cap sets.
Components such as fluid needle and nozzle made from stainless steel AISI 303.
PTFE coating on gun bodies for easy cleaning and fluid needle packing.
Low air consumption.

Compliance and Certification
The spray guns comply with the UK Environmental Protection Act 1990, Part 1 - 1997 Revision, and have been tested for paint transfer efficiency according to prEN 13966-1 Method 2. The transfer efficiencies achieved are:

Water Based Base Coat: 79.7%
2K HS Lacquer (Clearcoat): 76.7%
2K VHS Primer: 93.5%

Technical Specifications

Max. Working Pressure: 7.0 bar (100 PSI).
Noise Level: AZ10 HTE and AZ10 HTE SP at 75.2 dB (A); AZ10 HTE PC at 73.7 dB (A).
Temperature Range: 5~40°C.
Air Nipple: G 1/4”.
Fluid Nipple: G 1/4” for AZ10 HTE, G 3/8” for AZ10 HTE SE.

Model Variants
The document lists various models such as AZ 10 HTE, AZ 10 HTE SP, and AZ 10 HTE PC, with different specifications for air and fluid flow rates, nozzle sizes, and weights.

Conclusion
The Air Gunsa AZ 10 HTE Manual Spray Guns are designed for efficiency and ease of use, meeting environmental standards and offering a range of models to suit different needs.

Catalog excerpts

HIE HIGH TRANSFER EFFICIENCY AZ 10 HTE Manual Spray Guns CERTIFICATE OF COMPLIANCE We certify that we have tested (Report Number: TE002) the Air Gunsa AZ 10 HTE Suction Spray Gun manufactured by Air Gunsa s.r.l. in accordance with prEN 13966-1 Method 2 - tests for paint transfer efficiency (by weight) and that the spray gun complies with the requirements of the UK Environmental Protection Act 1990, Part 1 - 1997 Revision as detailed in PG6/34(97), PG6/23(97), PG6/40(94), PG6/41(94). Transfer efficiencies achieved with the materials detailed in the test report were: Water Based Base Coat 79.7% • reduced weight (about -20%) • more manoeuvrability • new air valve • fluid needle and fluid nozzle in stainless steel AISI 303 • fluid needle packing in PTFE • new high atomization air cap sets • air valve available according to the version • gun bodies coated in PTFE for easy cleaning • low air consumption Max. Working Pressure: 7.0 bar (100 PSI) Temperature range: 5~40° C AZ10 HTE and AZ10 HTE SP: Noise Level (LAeqT) 75.2 dB (A) AZ10 HTE PC: Noise Level (LAeqT) 73.7 dB (A) pressure for paint pump or paint pressure container AZ 10 HTE PC pressure with pressure container PC19 ANEST IWVTA ANEST IWATA U.K. Ltd. Unit 10 Little End Road,Eaton Socon, St. Neots - Cambridgeshire - PE19 8Jh Tel. +44 (0) 1480 405419 Fax: +44 (0) 1480 217610 [email protected] www.anest-iwata.co.uk

Open the catalog to page 1

AZ 10 HTE SP/SP AV pressure spray gun

AZ 10 HTE SP/SP AV pressure spray gun

Catalog excerpts

All Anest Iwata catalogs and technical brochures