HIE HIGH TRANSFER EFFICIENCY AZ 10 HTE Manual Spray Guns CERTIFICATE OF COMPLIANCE We certify that we have tested (Report Number: TE002) the Air Gunsa AZ 10 HTE Suction Spray Gun manufactured by Air Gunsa s.r.l. in accordance with prEN 13966-1 Method 2 - tests for paint transfer efficiency (by weight) and that the spray gun complies with the requirements of the UK Environmental Protection Act 1990, Part 1 - 1997 Revision as detailed in PG6/34(97), PG6/23(97), PG6/40(94), PG6/41(94). Transfer efficiencies achieved with the materials detailed in the test report were: Water Based Base Coat 79.7% • reduced weight (about -20%) • more manoeuvrability • new air valve • fluid needle and fluid nozzle in stainless steel AISI 303 • fluid needle packing in PTFE • new high atomization air cap sets • air valve available according to the version • gun bodies coated in PTFE for easy cleaning • low air consumption Max. Working Pressure: 7.0 bar (100 PSI) Temperature range: 5~40° C AZ10 HTE and AZ10 HTE SP: Noise Level (LAeqT) 75.2 dB (A) AZ10 HTE PC: Noise Level (LAeqT) 73.7 dB (A) pressure for paint pump or paint pressure container AZ 10 HTE PC pressure with pressure container PC19 ANEST IWVTA ANEST IWATA U.K. Ltd. Unit 10 Little End Road,Eaton Socon, St. Neots - Cambridgeshire - PE19 8Jh Tel. +44 (0) 1480 405419 Fax: +44 (0) 1480 217610 [email protected] www.anest-iwata.co.uk