Leak O2 or O2&CO2 THE COMPLETE ANALYSER FOR MEASURING GASES AND THE QUALITY OF YOUR PACKAGING BENEFITS Measure, audit, and optimise your packaging process in controlled, reproducible test conditions (new recyclable packaging, line speed, machine settings, etc.). Decision support : Integrated statistics Check «easy open» packages with a dynamic burst or resistance measurement. Assess the impact of a leak on the internal atmosphere over time Help with diagnosis at the slightest technical changes. How do you perform the inerting and sealing test on your packaging at the same time ? EXOS, ABISS® branded product is easy to use and measures the gas content, the tightness and strength of the seal on all types of packaging in a single test. These three tests are conducted on the same package. • Meets standards EXOS gives you complete information about the initial condition of your packaging so you can identify the expiry date or best-before date. EXOS measures : • The O2 and CO2 content • Leaks down to 5 µm (leak flow rate given in ml/min) • The creep test of the packaging • The strength of seals up to 1.4 bar This adaptable device is suitable for laboratory and production use. EXOS measures and quantifies the essential parameters for your packaging inspections. • 6 tests with 1 device: MAP (O2&CO2) + micro leaks + creep test (A&B) + seal strength DIN 55508-1 : measures flow rate at constant pressure ASTM F1140 : seal strength ASTM F2054 : burst test • Highest sensitivity in very low overpressure: micro-leaks down to 5 μm at over 10 mbar • Measures breathability: micro-perforated films • Detects clogged circuits • Wholly traceable: use all data analysis possibilities via USB, Ethernet, or directly in your ERP system. • Remote connection and remote maintenance: leverage the power of connected technology. • Accelerated test for big packaging SCOPE OF APPLICATION EXOS is used in the food processing, cosmetics, and pharmaceutical industries for all types of packaging including vacuum sealed, flexible, rigid, semi-rigid,

Leak O2 or O2&CO2 HOW DOES IT WORK? 1. Select the programme Select a program. Use the retaining arm to pierce the packaging with a needle through a septum. Once the needle is in position, the test can begin. LEAK MEASUREMENT The device takes and analyses a small amount of O2 and CO2 gases. The device measures the airflow needed to maintain a set overpressure in the packaging. Leaks are shown metrologically in ml/ min and equivalent µm. CREEP TEST Application of a constant test pressure to the packaging and monitoring of flow and pressure as a function of time. BURST TEST Pressure is applied to...