Fluidized bed drying/cooling for polymers and plastics Always at your service – all around the world! North America ANDRITZ Separation Inc. Phone: +1 (817) 465 5611 Fax: +1 (817) 468 3961 [email protected] South America ANDRITZ Separation Ltda. Phone: +55 (47) 3387 9110 Fax: +55 (47) 3387 9103 [email protected] Asia ANDRITZ Singapore Pte. Ltd. Phone: +65 (6512) 1800 Fax: +65 (6863) 4482 [email protected] Africa ANDRITZ Delkor (Pty) Ltd Phone : +27 (11) 466 2361 Fax : +24 (86) 636 2122 [email protected] All data, information, statements, photographs and graphic illustrations made in this leaflet are without any obligation and raise no liabilities to or form part of any sales contracts of Andritz AG or any affiliates for equipment and/or systems referred to herein. © Andritz AG 2012. All rights reserved. No part of this copyrighted work may be reproduced, modified or distributed in any form or by any means, or stored in any database or retrieval system, without the prior written permission of Andritz AG or its affiliates. Any such unauthorized use for SE.FDS.POLYM-PLAS.EN.0512 any purpose is a violation of the relevant copyright laws. Andritz AG, Stattegger Strasse 18, 8045 Graz, Austria

Fluidized bed drying/cooling for polymers and plastics Equipment criteria: cyclone cooling media hexan scrubbing condenser High operational availability Closed gas loop with solvent recovery Pressure resistant and gas tight design Low energy consumption due to inter- nal heat exchangers in the fluidized layer High alloy steel material available A special feed distributor for the wet product, outside of the drying cham- ber makes inside rotating spreaders Flowsheet of a dryer type HDC with solvent recovery same time minimizing respective gas flows and thereby reducing convective lating tests in...