STS
2Pages

{{requestButtons}}

Catalog excerpts

STS - 1

Conventional machineand 2 rolls standard. SCOPE STS designates a family of selective separators and sorters of non-magnetic metals (non-ferrous). Based on the This design offers many advantages : - simultaneous purification of the nonferrous metals and residual magnetic principle of separation by eddy currents, - maximum repulsion power thanks to the choice of Neodymium-Iron-Boron magnets with a large number of poles the STS systems are intended for the automatic purification of materials versus non-ferrous metals. Their design allows extracting the few residual ferrous metals and slighty magnetic INSTALLATION MODALITIES The STS systems are installed after screening and deferrization in a cab protected from bad weather. Two side catwalks allow access to - a thin flat conveyor belt, equipped with for adjustment and servicing. electric distribution cabinet used local console is installed nearby. endless conveyor belt is removable the side opposite the motors. - effectiveness on lead. TECHNICAL DESCRIPTION belt, they are subjected to a high intensity alternating magnetic field. The eddy currents resulting in the electrically conducting bodies allow repulsing nonmetals A vibrating feeder distributes the product to be treated into a fine and homogeneous layer on a wide and rapid conveyor belt. Once the materials tent). Performances are maximum when the single layer is ensured with stabilized products. Six STS types are offered according to the conveyor belt's usable width : - treatment of fine particles starting from centers and other high pureness physical do this, the materials must be prepa- double sealed edges, field is created by a polar wheel made of Neodymium-Iron-Boron magnets. This wheel allows also separating after leaving the field the residual ferrous metals and slightly magnetic particles. posite drum, - a curved, motorized drum, reinforced bearings accessible from the - a separation chute with flap adjustable ADDED FEATURES The STS systems are designed to ensure high levels of pureness for the treated materials : - control of the components manufac- - easily retractable side protection panelings, an unbalanced vibrating feed system, - a one-piece frame, housing all the abo- ve components. SPECIFICATIONS The STS systems are finishing machines ensuring high degrees of pureness. stainless steel drum, edges, capable of reaching 1600 mm,

Open the catalog to page 1
STS - 2

We provide after-sales service all marks and types of devices. Flow rates according to granular sizes and general Consult our technicians sorting organization. - a long conveyor belt to stabilize the products even at high speed (2 m/s), - mechanical and electrical safety devices, - removable panelings, - self-supporting frame, - adjustable flap from the exterior, with - accessible bearings and motors. PERFORMANCES Depending on the flows and the process organisation : « Collecting of non-ferrous metals from 95 % to more than 99 % ; « Collecting of residual ferrous metals > 99% « Accessible...

Open the catalog to page 2

All ANDRIN catalogs and technical brochures

  1. ASAP

    2 Pages

  2. OVBAP

    2 Pages

  3. OVBP

    2 Pages

  4. TEME

    2 Pages

  5. SMAR®

    2 Pages

  6. PMAP

    2 Pages

  7. ASP

    2 Pages

  8. V M

    2 Pages

  9. RTB

    2 Pages

  10. RTA

    4 Pages

  11. CMPAF CHPAF

    4 Pages

  12. CGMA R

    2 Pages

  13. CSA

    1 Pages