THE PATENT SMAR® is a family of patented separators of Non-magnetic (non-ferrous) Metals with reinforced protection. The patent consists of introducing a third roller in the eddy current separator in order to set the winding angle of the belt around the magnet wheel. This design has many advantages : - low retention time of ferrous metals in the zone of induction to eliminate the The performance is maximum when the single layer is provided by stabilised products. It varies according to : - the humidity and granulometry of the materials, - the type and shape of the non-ferrous metals to separate, - previous iron extraction, - the flow to process. 4 types of SMAR® are proposed according to the active width of the belt : risk of burning the belt, - large reduction of radial forces on the magnet wheel enabling the use of thick belts and thin composite shell. The longevity of the bearings is also increased, - placed in front of the third roller. APPLICATION Developed SMAR?® are intended for the automatic sorting of different non-ferrous metals in difficult humidity, chemical aggressiveness). The SMAR® are thereby classified incineration The SMAR® consists of : a thick and flat belt conveyor equipped with double edges for tight ness, - a motorised magnet wheel of large diameter assembled inside an impermeable composite shell, - a convex and rubber coated motorised roller, - a third cylindrical roller, fluff installations, processing of slag, etc. - reinforced element bearings, lateral protective covers that are easi- - a separation chute with adjustable flap by lifting screws, - a mechanical vibrating feeder, - a single frame housing all of the above parts. 600, 1000, 1500, 2000 mm. INSTALLATION The SMAR® are installed after ferrous separation and screening of the materials. Two lateral galleries are used to reach the adjustment and maintenance. The electrical cabinet used as a local desk is installed nearby. The endless belt is disassembled from the side opposite the motors. THE EXTRAS The SMAR® are designed for high performance with a large flow in difficult environments : patented Andrin system, - magnet wheel of large diameter with a maximum of rare earth poles fixed inside a stainless steel hoop, - 3000 r.p.m. with full safety shell,

We provide after-sales service all makes and types of devices. The flow is in function of the granularity and general organisation of the sorting. Other sizes are available. Consult our technicians. - impervious and reinforced composite - thick belt with - long conveyor to stabilise the products even at high speed (2,5 m/s), - mechanical and electrical safety, - removable protective covers, - self-carrying frame, - adjustable outside flap with position index, - accessible bearings and motors. PERFORMANCES According to the flow and organisation of the process : « Recovery of non-ferrous metals....