Catalogs >
ANDILOG Technologies >
Pull Testers for anchorages and fastenings

Pull Testers for anchorages and fastenings
1 / 8Pages

Catalog excerpts

Pull Testers for anchorages and fastenings - 1

PULL TESTERS Force testers for construction and safety ANDILOG - info@andilog.com - www.andilog.com

Pull Testers for anchorages and fastenings - 2

COM-TEN provides digital pull testers, and has been doing more and more work with the building industry in US and around the world since 1960. Nowhere is this more important than in the A building industry. S ubject continuously to the forces of wind, gravity, and even their own weight, not to mention events like earthquakes, buildings under construction need pull testers to measure every detail for the structure to be sound. Fasteners, membranes, foam, tiles that hold together must be checked with pull testers to make sure they hold under both normal and any possible abnormal conditions....

Open the catalog to page 2

Pull Testers for anchorages and fastenings - 3

ADHOR - Pull tester for adhesion testing The ADHOR portable tester is ideal for your quality test on coating layer. It allows you to evaluate easily on the field the pull strength of your coating system on various substrates. The ADHOR is used in construction, roofing and in all the industrial and building companies when the bonding strength measurement is required. Maximum capacity Adhesion testing Com-Ten is an instigator in the validation of installation of insulation membrane, with the UPLIFT Tester, and the measurement of the bonding strength of coatings, with the ADHOR Tester. These...

Open the catalog to page 3

Pull Testers for anchorages and fastenings - 4

Models Shape Dimensions Adhesion testing Special application Corn-Ten is an instigator in the validation of installati< of insulation membrane, with the Uplift tester. The products are design to proof the good installation ai property of adhesion directly in the field. The 24" x 24" uplift plate is glued to the tiles. The plate grabbed by the pull tester using a female slotted adapt which is attached to the Uplift pull tester. Then the pla is pulled off in direct tension using the hand crank of tl Uplift pull tester and the corresponding pressure applied. The gauge displays and...

Open the catalog to page 4

Pull Testers for anchorages and fastenings - 5

EXTRACTOR - Pull tester for anchors The EXTRACTOR portable pull-tester is ideal for your quality test on fixing fasteners. It allows you to evaluate easily in the field, the tensile pull-out force of your fixing system on various substrate materials. The Extractor is specially designed for the following domains: ► Measure the pull-out force to validate a safe working load ► Check the correct installation of anchors ► Measure the withdrawal resistance of fasteners used for attachment of various components to various materials ► Proof the holding power of anchors The Extractor fastener tester...

Open the catalog to page 5

Pull Testers for anchorages and fastenings - 6

Accessories for fixing testing Accessories for bolt, thread and anchors Tr eaded st u d Anchors and fasteners testing Accessories for eye bolt and ring Size ACC EXT CHAPM12 Clevis adaptor for eye bolt size 12 ACC EXT CHAPM16 Clevis adaptor for eye bolt size 16 Set of 3 blue extension legs Set of 3 adjustable leveling feet How to perform a pull test The principal objective in the use of a pull-out tester system is to validate the withdraw resistance of fixings on substrate. During the last decade the use of pull testers has become more and more widespread. And for good reasons. The usage of...

Open the catalog to page 6

Pull Testers for anchorages and fastenings - 7

Other applications PULL TESTERS - Other applicationsFoam compression testing The Foam Portable Tester has been designed by Com-Ten for your quality test on spray applied polyurethane foam (SPF). It allows you to evaluate easily in the field the quality of the foam sample. With our foam tester, there is no more downtime waiting for laboratory results, do it yourself saving time and money. The Foam Tester is specially designed for the following domains: ► Test the compressive yield strength of the foam ► Validate the quality of SPF fe have a wide range of special or custom accessories and...

Open the catalog to page 7

Pull Testers for anchorages and fastenings - 8

r^N DILOGPULL TESTERS Force testers for construction and safety EUROPE ANDILOG BP6200I 13845 VITROLLES CEDEX info@andilog.com www.andilog.com Tel: +33 442 348 340 USA ANDILOG / COM-TEN 6405 49th St North Pinellas Park, FL, 33781 sales@com-ten.com www.andilog.com Tel : + l 727 520 1200

Open the catalog to page 8