CentorW Easy TM,torque gauge with mini torque sensor
3Pages

{{requestButtons}}

Catalog excerpts

CentorW Easy TM,torque gauge with mini torque sensor - 1

Torque gauge with Mini sensor A portable Torque gauge for your daily control The manual torque gauge Centor Easy TM is equipped with a miniature reaction torque sensor with 3/8 square end. It allows you to easily and efficiently perform a wide variety of torque measurements on the field. Thanks to its male square you can adapt it to a large range of samples: screw, nuts, handle… It is ideally suited to perform your small torque measurements. The torque gauge is designed to answer to the daily requirements of groups production users. It requested by all the technical features request quality control: easy to read thanks to its large backlight screen, RS232 output, memory of the 100 latest values and a programmable noise limit. Thanks to the high-performance of its electronic the sampling rate is optimize to 1000Hz and has a resolution of 1/10000 FS. A statistics feature is available on the Centor EASY: the average and standard deviation of the current batch are calculated and displayed after each measurement. All the values of the production batch are kept in the memory and can be sent to a computer using the RS232. The operator is spared any data entry, knows his results in real time and saves everything at the end of the tests. Optimized for industrial environment, it is an ideal tool for tests during production. Statistics Statistics feature with automatic calculation of the average and standard deviation on 100 values in the memory. Models and capacities MODELS Specifications FEATuRES Accuracy 0,5 % FS Resolution 1/10,000 FS Data acquisition rate 1,000 Hz Overload protection 200% FS units Nm, kgcm, mNm, lbin Auto-off Adjustable from 5 to 15 min Bargraph √ Clockwise and counterclockwise peak √ Simultaneous display of peak and current reading √ use of a Foot pedal √ Tare function √ programable set point √ Statistics √ Internal memory Reversible display Operates on rechargeable batteries 8 hours of operation without recharging Fast charge Low battery indicator Metal casing and protective overmould RS232 output Data rate Digimatic output Analogic output Backlit display 100 results 180° √ √ √ √ √ Current value, min or max 50 values per second √ +/- 1V √

Open the catalog to page 1
CentorW Easy TM,torque gauge with mini torque sensor - 2

Torque gauge with Mini sensor Operating mode Force gauge maximum Secondary display Measurement direction Battery indicator Setting mode Backlit display command Analog load bar with set point marker 1 Type of value displayed Changing type of value Sending data through RS232 Options - software R-SIC II Data Acquisition Software ACQUISITION SETTINGS Compatible with CALIGRPH software: curve acquisition and reporting software for computer. Connects your Centor to CALIGRAPH to achieve in real time the acquisition of your measurements and allow recording of your values on your Compatible with RSIC...

Open the catalog to page 2
CentorW Easy TM,torque gauge with mini torque sensor - 3

Torque gauge with Mini sensor KNURL FINISH Options - sensors Housing dimensions In option, we have a large variety of sensors in order to comply with your dimensions and applications. Feel free ANDILOG Technologies info@andilog.com • www.andilog.com

Open the catalog to page 3

All ANDILOG Technologies catalogs and technical brochures

  1. CNR ETRD

    3 Pages

  2. CNR DT

    2 Pages

Archived catalogs

  1. CNR CT TM

    3 Pages

  2. CNR CT TW

    3 Pages

  3. CNR EA TT

    3 Pages

  4. CNR EA TM

    3 Pages

  5. CNR EA TH

    3 Pages

  6. CNR EA TW

    3 Pages

  7. CNR DLR

    2 Pages

  8. CNR CTR

    4 Pages

  9. CNR EAR

    3 Pages

  10. CNR FT

    1 Pages

  11. CNR EA

    2 Pages

  12. CNR CT

    4 Pages