Bottle Testers - Range Anditork Drivetork Topload and Extractor EN
12Pages

{{requestButtons}}

Catalog excerpts

Bottle Testers - Range Anditork Drivetork Topload and Extractor EN - 1

Test instruments and universal test machines for bottles Ranges Anditork, Drivetork, Extractor and Topload ANDILOG Technologies • info@andilog.com • www.andilog.co

Open the catalog to page 1
Bottle Testers - Range Anditork Drivetork Topload and Extractor EN - 2

The product range for bottles Screwing and unscrewing torque, uncorking force and crush tests In order to ensure and control the manufacturing process of your bottles, flasks and you closures, it is necessary to perform periodical control of the screwing torque on closures or the crush force on bottles. Presentation of the product ranges This verification can be done by means of torquemeters which enable the measurement of the screwing or opening torque on a bottle after it was screwed by a the screwing machine on the production line or the bottling machine. Force gauges and test machines...

Open the catalog to page 2
Bottle Testers - Range Anditork Drivetork Topload and Extractor EN - 3

Manual torque measurement: Anditork Manual torquemeters developed for the simple verification of the opening and closing torque on closures. The torquemeters Anditork have been developed for the manual opening and screwing torque measurements on bottles. They are adapted to a wide variety of samples such as bottles (water, syrup, wine, and liquor), flasks (perfume, medical), test tubes, jars or pot for instance. Advantages of the Anditork systems Holding tray The stainless steel tray of the Anditork guaranties the maximal longevity of the tooling and facilitates the cleaning in case of...

Open the catalog to page 3
Bottle Testers - Range Anditork Drivetork Topload and Extractor EN - 4

Manual torque measurement: Anditork Anditork First – Simple bottle tester for the production line The torque tester Anditork First enables test up to 12 Nm clockwise and counter clockwise. Its user interface is reduced to the minimum in order to be handy and facilitate the measurements. The navigation in the menus and function of the device can be done using only 3 keys: display the maximum torque value (in clockwise and counter clockwise), change the unit of measurement (Nm, lbin or kgcm) and tare of the measured value. Anditork Easy – More precision and traceability The Anditork Easy...

Open the catalog to page 4
Bottle Testers - Range Anditork Drivetork Topload and Extractor EN - 5

Manual torque measurement: Anditork FUNCTIONS Sensor Unit Resolution Accuracy Bauds rate Autonomy of use Sample diameter Lines displayed Set points Transfer of data Memory Curve Break calculation Printer Save on USB FIRST 12 Nm Nm, lbin, kgcm 0.01 Nm 0.5 % FS 1 000 Hz 16 hours 1 No No No No No No No EASY STAR DUAL 3, 6 or 12 Nm 1.5, 3, 6 or 12Nm 1.5, 3, 6 or 12Nm Nm, lbin, mNm, lbin Nm, mNm, lbin, lbft, inoz 1/10 000 1 / 10 000 0.25% FS 0.25 % FS 1 000 Hz 5 000 Hz 1 000 Hz each sensor 8 hours 8 hours 6 hours 10 up to 200 mm 2 3 Yes Yes 100 Hz 1 000 Hz 100 results 2 000 results No Yes No Yes...

Open the catalog to page 5
Bottle Testers - Range Anditork Drivetork Topload and Extractor EN - 6

Automated torque measurement: Drivetork Eliminate the influence of the user on your measurements In order to perform a precise and repetitive measurement it is preferable to use a torque bench with a programmable constant speed. In this way, the measurement performed will always be independent from the person who closes or opens the closure.Thanks to its controlled rotation at constant speed, the motorized test bench Drivetork operates without human influence on the bottles. It is best suited for screwing tests: closures, bottles, screws, nuts etc. Its measuring head is equipped with a...

Open the catalog to page 6
Bottle Testers - Range Anditork Drivetork Topload and Extractor EN - 7

Accessories for Drivetork Different plates and accessories for the range Drivetork and Anditork Various holding accessories for your samples can me mounted on the Drivetork. The choice of these accessories depends on the type of products you wish to test. We can also design and manufacture special clamps and grips on demand based on your test requirements. Please consult us for further information. Large plate (mounted at the bottom) Stainless steel plate with large diameter delivered with 4 grips in soft rubber. Length of the grips: 76 mm (0,3 in). Best suited for tests on bottles, flasks...

Open the catalog to page 7
Bottle Testers - Range Anditork Drivetork Topload and Extractor EN - 8

Range TopLoad - Crushing force Compression measurements on packaging - Topload tests The measurement of the crushing or compression force on a packaging enables to verify its shape retention especially during transportation. It consists in performing sampling inspection of the force needed to crush a packaging. It can be for instance a plastic, PET or metal bottles, cardboard or cans. Range TopLoad The measuring principle consists in crushing a sample at constant speed and to measure the stress (the force) needed to distort the packaging. A few measurement techniques exist depending on the...

Open the catalog to page 8
Bottle Testers - Range Anditork Drivetork Topload and Extractor EN - 9

Range Extractor – Extraction force of corks Extractor 500 – Manual force gauge for corks In conformity with the Cork Manufacturers Norm, the hand-held "corkscrew" Extractor 500 consists of a Centor First and specific accessories to measure the extraction force of still wine corks. It is a simple and robust solution, to be used per hand like a classical corkscrew and it saves the maximal applied of the user. Maximal tensile force: 500 N Extractor II - Test stand for the cork extraction This manual test stand enables to open bottle without the use of force. The force gauge displays the...

Open the catalog to page 9
Bottle Testers - Range Anditork Drivetork Topload and Extractor EN - 10

Acquisition and report software Caligraph – Visualize your tests in real time Optional acquisition software With the acquisition and analysis software Caligraph, you can watch the evolution of the curve of force and torque in real time, save your data, calculate automatically the results and edit customizable test reports. The measurement starts with a simple click and you follow live with a speed rate of 1.000 Hz (depending on the equipment) the essential information with predefined calculations of your choice. Caligraph is the indispensable complementary tool to utilize the full potential...

Open the catalog to page 10
Bottle Testers - Range Anditork Drivetork Topload and Extractor EN - 11

Driving and test software CalifortCalifort - Advanced material testing software The software Califort enables you to perform complex and precise force and torque measurements in all simplicity. Califort offers you several benefits: • Intuitive and preset for the users • Performing and handy to customize your measurements • Customizable in the editing of your reports and the result analysis The new designed interface of Califort has been fully optimized to offer a better experience with a clear and well organized interface. It facilitates reading and usability of the software for faster and...

Open the catalog to page 11

All ANDILOG Technologies catalogs and technical brochures

  1. CNR DT

    2 Pages

Archived catalogs

  1. BAT1000

    1 Pages

  2. CNR CT TM

    3 Pages

  3. CNR CT TW

    3 Pages

  4. CNR EA TT

    3 Pages

  5. CNR EA TM

    3 Pages

  6. CNR EA TH

    3 Pages

  7. CNR EA TW

    3 Pages

  8. CNR DLR

    2 Pages

  9. CNR CTR

    4 Pages

  10. CNR EAR

    3 Pages

  11. CNR FT

    1 Pages

  12. CNR EA

    2 Pages

  13. CNR CT

    4 Pages