*mydirectindustry

Catalogs
Anderson Power Products
4 Position Environmental SPEC Pak Connector

4 Position Environmental SPEC Pak Connector

Product catalog summary

Overview: The document outlines the technical specifications and assembly instructions for SPEC Pak 4 Position connectors by Anderson Power Products, designed for rugged and environmentally sealed applications across various industries such as marine, wind power, lighting, and transportation. It also covers a 4-position receptacle and plug system for PP15/45 housings.

Specifications:

Electrical: The connectors have a voltage rating of 600 AC/DC and a dielectric withstanding voltage of 3000 AC. They operate within a temperature range of -20°C to 105°C (-4°F to 221°F) and have a flammability rating of UL 94V-0.
Mechanical: They support a minimum of 1500 mating cycles with an average connect/disconnect force of 12 lbf (53 N) and are rated IP67 for environmental sealing.
Material: The shells are made of PBT, with nylon latches and polycarbonate holders, and are typically black.

Components:

Includes panel mount gasket, touch-safe housings, interfacial sealing gasket, and latch options.
Power contacts support up to 4 connections, while signal contacts support up to 16.
Color-coded housings facilitate easy wire identification.

Applications: These connectors are suitable for mass transportation, off-road vehicles, factory automation, oil and petrochemical exploration, and agricultural equipment.

Ordering Information:

Part numbers are configured based on shell color, style, size, and insert arrangement.
Kits available include plug, receptacle, and cover kits, with component replacement parts also listed.

Additional Notes: A temperature chart for the SPEC Pak 4 Pole shows temperature rise based on amperage and wire gauge. Torque requirements for cable gland assembly are also provided.

Assembly Instructions for PP15/45 Housings:

The receptacle is designed for 4-position PP15/45 housings, requiring a #4 screw with a torque specification of 2½ to 4 in-lbf (0.28 to 0.45 Nm).

Dimensions:

Interfacial gasket dimensions are 68.3 mm (2.69 inches) in length and 40.4 mm (1.59 inches) in width.
Various dimensions are provided for different views and components, such as latch sweep and panel cut out dimensions.

Components for PP15/45:

Includes PR - Right Angle Adapter, PS - Plastic Adapter, CT - Threaded Conduit Adapter, CA - Push-in Conduit Adapter, PF - Plastic Flex PG.

Views:

Top, front, side, and mated side views are provided for both the receptacle and panel cut out.

Key Measurements:

Latch sweep is 34.5 mm (R1.36).
Various other measurements ensure precise assembly and compatibility.

Catalog excerpts

4 Position Environmental SPEC Pak Connector-1

Marine Wind Power Lighting Transportation Pumps Ground SupportMachine Tool Industrial Automation Motor Solar Power Harsh Environments MiWidPLihtiTttiPGdSt >

Open the catalog to page 1

4 Position Environmental SPEC Pak Connector-2

For Use with APP Powerpole Signal, Power & Ground Contacts & Housings APPΒs new SPEC Pak Connector Series uses rugged and environmentally sealed (IP67) shells to protect existing APP contacts and housings. Customer configured SPEC Pak Connectors may be used anywhere a rugged or water proof high power, signal and ground interconnect solution is required such as in; mass transportation, off- road vehicles, factory automation, oil and petrochemical exploration, agricultural equipment, and many more. The core APP Powerpole technology within the SPEC Pak is proven reliable and cost effective. The...

Open the catalog to page 2

4 Position Environmental SPEC Pak Connector-3

Electrical Ratins or SPEC Pak UseElectrical oltage Rating (AC/DC)600Dielectric Withstanding oltage (AC)3000Operating Temperature (C)-20 to 105(F)-4 to 221Flammability Rating of SPEC ShellsUL 94-0 UL Current Rating (Amperes)15 to 40CSA (30C Rise) (Amperes)10 to 26oltage Rating (AC/DC)600Contact Barrel Wire Size (AWG)20 to 10 (mm)0.5 to 4.0Average Contact Resistance (micro-ohms)600 Contact Retention Force (lbf)25 (N)111 Operating Temperature (C)-20 to 105 (F)-4 to 221Flammability RatingUL94 -0 Contact MaterialCopper Contact PlatingTin or Silver Mechanical Shells / Latch Mating Cycles1500 Min Average...

Open the catalog to page 3

4 Position Environmental SPEC Pak Connector-4

NOTE:- Mounting hardware not included- Recommended mounting hardware is #4 screw- Recommended torque for mounting hardware is 2 to 4 in-lbf (0.28 to 0.45 Nm) HEADQUARTERS: Anderson Power Productsݮ, 13 Pratts Junction Road, Sterling, MA 01564-2305 USA T:978-422-3600 F:978-422-3700 EUROPE: Anderson Power Products Ltd., Unit 3, Europa Court, Europa Boulevard, Westbrook, Warrington, Cheshire, WA5 7TN United Kingdom T: +44 (0) 1925 428390 F: +44 (0) 1925 428399 ASIA / PACIFIC: IDEAL Anderson Asia Pacific Ltd., Unit 922-928 Topsail Plaza, 11 On Sum Street, Shatin N.T., Hong Kong T:+(852) 2636 0836...

Open the catalog to page 4

4 Position Environmental SPEC Pak Connector-5

See Power Contact Code Selection Chart Section for Amperage Ratings HEADQUARTERS: Anderson Power Products, 13 Pratts Junction Road, Sterling, MA 01564-2305 USA T:978-422-3600 F:978-422-3700 EUROPE: Anderson Power Productsή Ltd., Unit 3, Europa Court, Europa Boulevard, Westbrook, Warrington, Cheshire, WA5 7TN United Kingdom T: +44 (0) 1925 428390 F: +44 (0) 1925 428399 ASIA / PACIFIC: IDEAL Anderson Asia Pacific Ltd., Unit 922-928 Topsail Plaza, 11 On Sum Street, Shatin N.T., Hong Kong T:+(852) 2636 0836 F:+(852) 2635 9036 CHINA: IDEAL Anderson Technologies (Shenzhen) Ltd., Block A8 Tantou Western...

Open the catalog to page 5

4 Position Environmental SPEC Pak Connector-6

Operating Temp -40C to 100аC (-40F to 212аF) IP Rating IP68*** Thread Type PG > Material (Push-in Conduit) Shell Nylon PA Gasket TPE Color** Black Material (All Others) Shell Nylon PA66 (UL94 V-2)** Gasket EPDM Color** Black Torque Requirements Mechanical Operating Temp -30C to 100аC (-22F to 212аF) IP Rating IP68* Thread Type PG Cable Gland Body to Plug Housing- Hand tighten until snug, tighten additional 1/8 - 1/4 turn with wrenchSealing Nut to Cable- Hand tighten until snug, tighten additional 1/2 - 3/4 turn with wrench > * Per EN60529 ** Contact factory for UL94 V-0 material *** (5 Bar pressure)...

Open the catalog to page 6

4 Position Environmental SPEC Pak Connector-7

C1C2 Washer Body Seal Claw Sealing Nut C1C2 F1 Washer Body Seal Sealing Nut Corrugated C1C2 Washer Body Seal For R/A versions contact Factory Lock Nut HEADQUARTERS: Anderson Power ProductsԮ, 13 Pratts Junction Road, Sterling, MA 01564-2305 USA T:978-422-3600 F:978-422-3700 EUROPE: Anderson Power Products Ltd., Unit 3, Europa Court, Europa Boulevard, Westbrook, Warrington, Cheshire, WA5 7TN United Kingdom T: +44 (0) 1925 428390 F: +44 (0) 1925 428399 ASIA / PACIFIC: IDEAL Anderson Asia Pacific Ltd., Unit 922-928 Topsail Plaza, 11 On Sum Street, Shatin N.T., Hong Kong T:+(852) 2636 0836 F:+(852)...

Open the catalog to page 7

4 Position Environmental SPEC Pak Connector-9

NOTES: 1. Current ratings: ? First number represents current rating per pole for 30C temperature rise (25 / 38) ? Second number is the maximum recommended current per pole based on a 25аC ambient (25 / 38)2. Configuration H - N based on signal contacts crimped to #20 AWG wire and carrying 1 amp 3. Denotes wire size not appropriate for power contact HEADQUARTERS: Anderson Power Products, 13 Pratts Junction Road, Sterling, MA 01564-2305 USA T:978-422-3600 F:978-422-3700 EUROPE: Anderson Power Productsή Ltd., Unit 3, Europa Court, Europa Boulevard, Westbrook, Warrington, Cheshire, WA5 7TN United...

Open the catalog to page 9

4 Position Environmental SPEC Pak Connector-10

Housing Only Part Number Description #16 to #20 AWG (1.0 to 0.5 mm) 262G1 Reel-LD-Tin Plate 200G2L SuperFlex, Reel-LD-Tin Plate#12 to #16 AWG (2.5 to 1.0 mmҲ) 261G1 Reel-LD-Tin Plate#10 to #14 AWG (4.0 to 1.5 mm) 261G2 Reel-HD-Tin Plate 200G1L SuperFlex, Reel-LD-Tin Plate Part Number Description 1327 Red Housing 1327G5 Green Housing 1327G6 Black Housing 1327G7 White Housing 1327G8 Blue Housing 1327G16 Yellow Housing 1327G17 Orange Housing 1327G18 Gray Housing 1327G21 Brown Housing 1327G22 Pink Housing 1327G23 Purple Housing > Part Number Description 1827G1 Green Housing 1827G2 Brown Housing Housing...

Open the catalog to page 10

4 Position Environmental SPEC Pak Connector-12

DS-4PSPAK REV00 HEADQUARTERS: Anderson Power Productsݮ, 13 Pratts Junction Road, Sterling, MA 01564-2305 USA T:978-422-3600 F:978-422-3700 EUROPE: Anderson Power Products Ltd., Unit 3, Europa Court, Europa Boulevard, Westbrook, Warrington, Cheshire, WA5 7TN United Kingdom T: +44 (0) 1925 428390 F: +44 (0) 1925 428399 ASIA / PACIFIC: IDEAL Anderson Asia Pacific Ltd., Unit 922-928 Topsail Plaza, 11 On Sum Street, Shatin N.T., Hong Kong T:+(852) 2636 0836 F:+(852) 2635 9036 CHINA: IDEAL Anderson Technologies (Shenzhen) Ltd., Block A8 Tantou Western Industrial Park, Songgang Baoan District, Shenzhen,...

Open the catalog to page 12

All Anderson Power Products catalogs and technical brochures

Archived catalogs

6 Position Environmental SPEC Pak Connector
12 Pages