SENSORS FOR FOOD AND BIOPHARMA. Temperature Sensor without thread Application/Specified usage ·· Installation in thin-walled pipes and vessels ·· No product contacting of the sensor (with thermowell) ·· Demounting the sensor without opening the process Application examples ·· Process monitoring in pipes ·· Temperature measurement in pressure pipes ·· Measurement of paste products in pipes Hygienic design/Process connection ·· Hygienic and easy sterilizable installation by weld-in sleeve (e.g. EMK-25/76) or weld-in thermowell (e.g. ESH-KM12/...). ·· By elastomer free sealing system the connection is free of gaps and crevices ·· CIP-/SIP-cleaning up to 140 °C ·· Product contacting materials compliant to FDA ·· Sensor and head completely made of stainless steel Features ·· Variable insertion depths ·· Integrated transmitter (optional) ·· Different types of electrical connections possible Temperature sensor TFP-169 with transmitter MPU-M Options/Accessories ·· 2 x Pt100 (not retrofittable) ·· 2 x Pt100 with two transmitters (not retrofittable) ·· Programmable transmitters MPU-4 and MPU-M with output 4...20 mA, 2-wire ·· Integrated transmitters for HART-protocol ·· Programming adapter MPU-P 9701 ·· Integrated transmitter MPU-LCD with display in connecting head ·· Pt100 chip with other classes of accuracy (1/3B, 1/10B) ·· Fast response sensor tip 3 mm and 4 mm ·· Pre-assembled connecting cable for M12 plug ·· Fixed cable in other lengths and material available Accessories PVC-cable with M12-connection made of 1.4305, IP 69 K, unshielded M12-PVC / 4-5 m PVC-cable 4-pin, length 5 m M12-PVC / 4-10 m PVC-cable 4-pin, length 10 m M12-PVC / 4-25 m PVC-cable 4-p

Specification Temperature sensor

Electrical Connection Electrical connection without transmitter Elektrischer Anschluss ohne Kopftransmitter Electrical connection with Kopftransmitter Elektrischer Anschluss mit transmitter Configuration M12 plug Belegung M12-Stecker 1: + supply 2: - supply 4...20 mA 3: not connected 4: not connected With cable gland Mit Kabelverschraubung With 2 x M12 plug Belegung 2. M12-Stecker Configuration 2nd M12 plug 4...20 mA current loop Stromschleife With cable gland Belegung Klemmen terminal Configuration strip 3 4 Electrical connection with two transmitter (TFP-69) clamps for 1st Pt100 Klemmen für...

Dimensional Drawings

Dimensional Drawings Sensor tip diameter and response time All temperature sensors are available with smaller sensor tips, to ensure a shorter response time. The below-mentioned times were measured by emersing a temperature sensor from room temperature into boiling water. Sensor tip Ø 6 mm with thermowell Note When using weld-in thermowells we recommend to use heat-conductive paste too. This can reduce the r

Warnings | Option MPU-LCD Mechanical Connection / Installation Conventional Usage ·· Check the compatibility of the sensor length to the used thermowell. ·· Not suitable for applications in explosive areas. ·· Not suitable for applications in security-relevant equipments (SIL). Transport / Storage ·· No outdoor storage ·· Dry and dust free ·· Not exposed to corrosive media ·· Protected against solar radiation ·· Avoiding mechanical shock and vibration ·· Storage temperature -55...+90 °C ·· Relative humidity maximum 98 % ·· You have to comply with applicable regulations and directives. ·· In case...

Order Code Order Code for version with 1 x Pt100 (connecting head 0 55 mm) (connecting head 0 18 mm, electrical connection M12 plug) (sensor with head 0 18 mm, electrical connection 2,5 m PVC-cable; no transmitter possible) (sensor without connecting head, with 3 m PVC-cable, other lengths: on request) (sensor without conn. head, prot. cl. IP 68, with 3 m PTFE-cable, other lengths: on request) Sensor length EL in mm 050...250 xxx (special length) Diameter thermowell in mm 6 8 10 12 Diameter sensor tip in mm X (no reduction) 4 (only for thermowell 6 mm and 8 mm; no extra charge for sensor length...

Product Information TFP-49, -69, -169, -189, -06 Order code for version with 2 x Pt100 TFP-49.2 (connecting head 0 55 mm, 2 x Pt100, no transmitter possible!) TFP-69 (higher connecting head 0 55 mm, 2 x Pt100, prepared for 2 x transmitter) TFP-189.2 (connecting head 0 18 mm, electrical connection 2,5 m PTFE-cable; other lengths: see at accessories) Sensor length in mm 020...500 (in steps of 5 mm) Diameter sensor tip in mm X (no reduction) 3 (only with thermowell 6 mm) 4 (only with thermowell 6 mm and 8 mm) 6 (only with thermowell 8 mm and 10 mm) 8 (only with thermowell 12 mm) Electrical connection...