PASTEURIZATION CONTROLS LB" Point Level Probes for Conductive Liquid Applications compressed elastomeric seal between the probe and Teflon® coating • Proprietary elastomric probe-to-fitting junction • 3-A compliant; Third party verified in accordance with • Integrated stainless steel head makes retrofits simple • Water-tight quick-disconnect includes pre-wired tank ground • Up to four probes per fitting for multiple level applications • Rated for Process temperatures • HTST Balance Tanks • Cream Balance Tanks • Silo High Level Alarm Conductive Fluid The LB Point Level probe provide long-term reliability in applications where they wide temperature swings and developed to seal Teflon® insulation to stainless steel probes providing a smooth. thick, permanent coating that's impervious to conditions probe that allows any probe to in the field, while maintaining the Switching modules are connect- Quick Disconnect. The module provides Form-C relay contacts supplied with Single Pole/Double Throw (SPDT) contacts. Mod- ules are designed for single level available in fixed or field adjust- able sensitivity. A NEMA 4X mounting the switching module The LB also features a second proprietary, elastomeric each probe to insure a sanitary seal is maintained at the probe- to-fitting junction. No threads exist within or near the product contact zone. stainless steel wiring head that simplifies field wiring and retro- fits to existing electronic controls. The head and fitting assembly probes, plus a separate tank reference connection. pre-wired and sealed quick- be specified with a field wireable mating connector or with any length of pre-wired cable. The quick disconnect even meets disconnected position! found within this brochure or ANDERSON INSTRUMENT CO.. INC • 156 AURIESVILLE RD. • FULTONVILLE. NY 12072 • USA • 800-833-0081 • FAX 518-922-8997 ANDERSON INSTRUMENT CO. LP • 400 BRITANNIA RD. EAST. UNIT 1 • MISSISSAUGA. ONTARIO L4Z 1X9 • CANADA • 905-568-1440 • FAX 905-568-1652 NEGELE MESSTECHNIK GmbH (A Division of Anderson) • RAIFFEISENWEG 7 • D-87743 EGG A. D. GÜNZ • GERMANY • +49 (0) 8333/9204-0 • FAX +49 (0) 8333/9204-49

The drawing illustrates a typical control system installation handling a "pump-up" (inverse) operation. In this ar- rangement the pump starts when the liquid drops below the low probe and stops when the liquid touches the high probe for the purpose of replenishing liquid drawn from the vessel. The level varies but is maintained within the limits established by the tips of the probes. A "pump-down" (direct) application is opposite, with the pump starting at the high level and removing liquid from the tank until the low level probe is clear of liquid. TYPICAL FLUIDS: AVERAGE SENSITIVITY Baby Foods...

PROBE ASSEMBLIES BODY (FITTING) STYLE SENSOR WIRING Quick Disconnect Receptacle Quick Disconnect Receptacle w/ connector (field wireable) Quick Disconnect Receptacle w/ Plug & 25' Cable Quick Disconnect Receptacle w/ Plug & 50' Cable Quick Disconnect Receptacle w/ Plug & 75' Cable Quick Disconnect Receptacle w/ Plug & 100' Cable PROBE COATING - 1. 1-1/2" Tri-Clamp available with 1 or 2 probes only. 2. All standard probe lengths listed are available at standard lead-times. Probes may be specified to the nearest whole inch between 3" and 72" by simply inserting the length in the part number. Allow...

ANDERSON INSTRUMENT CO., INC • 156 AURIESVILLE RD. • FULTONVILLE, NY 12072 • USA • 800-833-0081 • FAX 518-922-8997 ANDERSON INSTRUMENT CO. LP • 400 BRITANNIA RD. EAST. UNIT 1 • MISSISSAUGA. ONTARIO L4Z 1X9 • CANADA • 905-568-1440 • FAX 905-568-1652 NEGELE MESSTECHNIK GmbH (A Division of Anderson) • RAIFFEISENWEG 7 • D-87743 EGG A. D. GÜNZ • GERMANY • +49 (0) 8333/9204-0 • FAX +49 (0) 8333/9204-49