Assembly Instructions 2. Attach top and bottom side beams to the uprights to create 2 side frames. Tap with a mallet to secure the beams in place. 3. Attach the rest of the side beams at desired heights. 4. Attach the top and bottom face beams at the same level as the side beams to secure the bay. Shelf Width Load Deck Supports 1. Attach plastic feet to all 4 uprights 5. Attach the rest of the face beams at the same level as the side beams. 6. Attach front to back deck suport to each level, if applicable (see chart for quantity required). 7. Place the chipboard shelves onto the levels. T------. r------. HEAVY RIVET Loads and Capacities Shelf Pitch Bay Load *Shelf Pitch - distance between shelf levels *Bay Load - based on 4 levels with the 1st level at the base Tools Required Rubber Mallet Safety Precaution