Powerful, stand alone motion control BWide input range from 100V to 240C, single or 3 phase High efficiency control for rotary and linear motors Industry leading EtherCAT® fieldbus Field upgradeable firmware Communicate using SoE or CoE Both 3A and 9A drives available with STO in < V < Run high speed, high bandwidth, multi-axis systems with EtherCAT'*” Simple and Easy ANCA MotionBench configuration software guides you through system setup in clear and concise steps. Everything On-board Plug and play direct from mains power with a built in 24V power supply. A stand alone solution for both rotary and linear motor control systems. Optimise your System Customise detailed drive configuration and tuning parameters for unique applications. Stay ahead with field upgradeable firmware. EtherCAT® is a registered trademark and patented technology, licensed by Beckoff Automation GmbH, Germany.

Interaction - LED Display - 4x Buttons 3A Drive Digital I/O Supply - Mains 100-240Vac input - In-built 24Vdc power supply - 50/60Hz input - 3Arms or 9Arms continuous output Control - Linear and rotational motors - Position, velocity and torque control - Thermal and over-current protection Special Features - >90% efficiency at load - Field upgradeable firmware - Safe Torque Off IEC 61800-5-2 (opt.) - MotionBench configuration software - In-built brake resistor liEEEH MODE UP DOWN 9A Drive Communication - 100Mbps - EtherCAT® fieldbus - SoE IEC 61800-7-204 profile (opt.) - CoE CiA 402 profile (opt.) -...