ANAMET EUROPE YOUR SPECIALIST FOR HEAT PROTECTION

Product selection table Anamet heat protection products. Product Temperature short term Hiprojacket Aero Silicone Glass fibre Halogen-free -55 +260 RoHS Hiprojacket Industrial Silicone Glass fibre Halogen-free -55 +260 RoHS Hiprojacket Light Silicone Glass fibre Halogen-free -55 +260 RoHS Silicone Glass fibre Halogen-free -55 +260 RoHS Silicone Glass fibre Halogen-free -55 +260 RoHS Silicone Glass fibre Halogen-free -55 +260 RoHS Hiproblanket Wrap Light Silicone Glass fibre Halogen-free -55 +260 RoHS Silicone Glass fibre Halogen-free -55 +260 RoHS Hiproblanket light Silicone Glass fibre Halogen-free -55...

Engineering data heat protection products The right choice of heat protection materials is important for the functioning and durability of the equipment. The heat protection materials of Anamet Europe B.V. can basically be divided into 3 groups: 1. Hipro-products, consisting of an E-glass fibre base, covered with iron-oxide silicon rubber. Temperature range: -55 °C till +260 °C continuous, +800 °C for approx. 20 minutes and +1640 °C for 15-30 seconds Flammabillity : UL-94 V1. Thermo-products, consisting completely of E-glass fibre. Temperature range: -55 °C till +538 °C continuous. Silica-products...

Hiprojacket® Aero: Braided sleeving, solid constructed acc. SAE AS1072, superior short term flame protection. The ultimate heatprotection for cables and hoses. This solid braided glassfiber sleeving, with thick silicone cover, is constructed according to the Aerospace Standard SAE AS1072 and allows qualified hose assemblies to pass the AS1055 testing. This Hiprojacket offers superior short term flame protection and excellent temperature reduction. In the field of cable protection, a complete program of Hiprojacket fittings is available for easy installation. Resistant to hydraulic fluids, lubricating...

Hiprojacket® Aero: Braided sleeving, solid constructed acc. SAE AS1072, superior short term flame protection. anamet heat PROTECTION PRODUCTS PROTECTION SLEEVE TYPE HIPROJACKET AERO

Hiprojacket Industrial: Knitted sleeving, good short term flame protection. The industrial alternative for less demanding situations. This Industrial Grade has a more open construction of glass fibre, but due to the thick silicon cover still offers good short term flame protection and temperature reduction. Resistant to hydraulic fluids, lubricating oils and fuels, Hiprojacket Industrial protects against molten splash, occasional flames, heat radiation, energy loss in piping and hoses; also protects employees from burns. Hiprojacket Industrial is frequently used to protect cables and industrial...

Hiprojacket Industrial Hiprojacket Industrial: Knitted sleeving, good short term flame protection. m iK ANAMET HEAT PROTECTION PRODUCTS •j* -sf. C’ O LOW OIL SMOKE GOST-R RoHS PROTECTION SLEEVE TYPE HIPROJACKET INDUSTRIAL Hiprojacket Industrial Hiprojacket Industrial

Anaconda nickel plated brass fittings for Hiprojacket®. To fit the Hiprojacket you can use the standard Anaconda fittings (which are being used for metal conduits Sealtite), if you replace their standard polyamide clamping rings with the special metal clamping rings mentioned here under. The fittings are also available in 45°, 90° and in stainless steel (see also chapter 4 and 6). Material & Construction: Construction: Nickel plated brass fitting, consisting of 4 parts (counter nut, clamping ring, ferrule and body). Material: Counter nut, body, clamping ring and ferrule are nickel plated brass...

ANAMET HEAT PROTECTION PRODUCTS Hiprojacket® Light: Lightweight sleeving, moderate thermal protection. The most economic alternative for less demanding situations. This Light Grade has a thinner construction of glass fibre and silicone rubber cover, but due to the thin silicon cover offers some short term flame protection and a small temperature reduction. Resistant to hydraulic fluids, lubricating oils and fuels, Hiprojacket Light offers limited protection against molten splash and occasional flames. Hiprojacket Light is frequently used to protect cables and wires in the machine- and apparatus-building....

Hiprosiltape : Tape from self-fusing silicone rubber. Hiprosiltape is specially formulated to adhere to itself and is used to seal the ends of Hiprojacket and Hiprotape. Neatly applied over the transition from the Hiprojacket/Hiprotape to the surface of the hose or conduit being protected, the self-fusing tape provides a cohesive moisture resistant barrier. Conforming smoothly when wrapped around even complex shapes, the tape bonds at room temperature into a single inseparable layer after 24 hours. The product remains non-tacky to touch and is inherently flame retardant, providing a superior...

Hiprotape®: Tape from woven fiberglass yarns, with red iron-oxide silicon rubber. ANAMET HEAT PROTECTION PPODUCT5 Hiprotape provides the same heat protection as Hipro-jacket Industrial Grade, in the form of a band which can be wrapped around already installed cables, hoses and valves. Resistant to hydraulic fluids, lubricating oils and fuels, Hiprotape protects against molten splash, occasional flames, energy loss in piping and hoses; also protects employees from burns; allows “bundling” of wires, hoses and cables. Hiprotape is applicable to larger diameters pipe and allows installation in situations...

Hiprotape® Light: Tape from woven fiberglass yarns, with thin double layer of silicon rubber. Hiprotape Light is the economical version of Hiprotape for less demanding applications. This tape can be wrapped around already installed cables, hoses and valves. Resistant to hydraulic fluids, lubricating oils and fuels, Hiprotape Light provides limited protection against molten splash and occasional flames. Typically used in machine- and apparatus-building. Temperature: -55 °C till +260 °C continuous. Under flame till +538 °C for approx. 20 minutes. Radiation heat till +538 °C for approx. 20 minutes. Small...