ATEX Fittings Catalogue
32Pages

{{requestButtons}}

Catalog excerpts

ATEX Fittings Catalogue - 2

Compr. Impact Tensile R = regular N = non armoured cable A = directly on Anaconda conduit B = barrier A = armoured cable C = male / female adapter X = loose wires For instance: Type BXA is a barrier fitting for loose wires and directly connected on an Anaconda conduit. ANAMET EUROPE

Open the catalog to page 2
ATEX Fittings Catalogue - 3

Description Anaconda lECEx-ATEX cable-hose-fittings The Anaconda lECEx-ATEX certified cable-hose-fittings together with the Anaconda Sealtite conduits represent the ideal solution for the mechanical protection of cables and for the connection of equipment in a safe and explosionproof way. The temperature range of the standard version with an internal seal in EPDM is between -40°C and +100 °C, while the temperature range of the high temperature version with an internal seal in Silicone is between -70 °C and + 220 °C. The new barrier type with a 2 compound epoxy sealing has a temperature...

Open the catalog to page 3
ATEX Fittings Catalogue - 4

Localisation of Gas and Dust Ex-Zones Zone 2 Zone 0 Tank Flammable Liquid Flammable Dust IECEx-ATEX fitting selection table: START Type BXA (straight) Loose wires ? Unarmoured cable ? Type BXA (straight) page 11 and 12 or Type BXC (for 45°/90°) page 25 till 28 or Type RNC (for 45°/90°) page 29 till 31 Armoured cable ? Type BAA (straight) page 21 till 24 NO Type RAA (straight) page 15/16 and 19/20

Open the catalog to page 4
ATEX Fittings Catalogue - 5

The Anaconda lECEx-ATEX cable-hose-fittings are certified and marked according to Directive 94/9/CE: Ex I M2 / II 2 GD. This means that our lECEx-ATEX fittings can be used in mines in zone 1, as well as in all other explosive atmospheres containing gases, vapours and mists in zone 1 and 2 and containing dusts in zone 21 and 22. Certification and marking of Anaconda IECEx-ATEX cable-hose-fitting, according to standards: ANACONDA ATEX FITTINGS Next to the certification and marking according to directive 94/9/CE the Anaconda cable-hose-fittings are certified and marked according to the above...

Open the catalog to page 5
ATEX Fittings Catalogue - 6

Sealtite AS black: Robust & Anti-Static. The conduit Sealtite AS has been developed for all those applications in ATEX areas at risk of explosion, where the use of a conduit, coated with anti-static material is necessary. Using AS conduit, the possibility of electrostatic charges accumulating on the surface is excluded. Thus there will be no formation of sparks in the case of discharge by contact. Material & Construction: Construction: Galvanised steel core, square-locked with cord packing, thick smooth thermoplastic cover (PVC compound). From 1.1/2" a fully inter-locked profile will be...

Open the catalog to page 6
ATEX Fittings Catalogue - 7

CONDUFT TYPE HF Y PLLIE Sealtite HFX blue: Robust, halogen-free, very flexible, good flame properties and superior chemical resistant. Type HFX blue is very suitable for installations, which are subject to frequent movements as HFX keeps its excellent flexibility even at low temperatures. It is also used when halogen free components are required. The blue colour is used in Atex Exi applications like in turbines, generators, valves, pressure control, metering, in Oil& Gas, chemical and petrolchemical industry, shipbuilding industry and navy. Material & Construction: Construction: Galvanised...

Open the catalog to page 7
ATEX Fittings Catalogue - 8

Robust, halogen-free, very flexible, chemical resistant, good flame properties and extra corrosion resistant. Square locked A halogen-free conduit for use in public areas. The features of the HFX cover are necessary in the field of environment and safety, as the European guidelines state that certain areas need to be free of halogens. The HFI has two unique features, that it is extremely flexible at both high as low temperatures and extra corrosion resistant because of the stainless steel inner hose. This makes the HFI very suitable for installations in the chemical and...

Open the catalog to page 8
ATEX Fittings Catalogue - 9

Sealtite HTDL black: Robust, UL & CSA approved, wide temperature range. ANACONDA SEALTFTE" conduft TYPE HTDL BLACK Type HTDL is the most used Anaconda Sealtite® conduit with integral grounding copper wire (till 1.1/4"). The HTDL is UL & CSA approved and has a wide temperature range. Because of the integrated copper grounding wire the HTDL also offers a fine EMI/EMP shielding, which makes it useable for applications where a high degree of electrical continuity is required. Type HTDL is perfectly suited for machines and installations that will be exported to countries outside Europe. You...

Open the catalog to page 9
ATEX Fittings Catalogue - 10

Sealtite ZHUA black: Robust, UL approved, halogen-free, good flame properties (UL-94 V0). Type ZHUA is the ultimate Sealtite conduit with integral grounding copper wire (till 1.1/4"). The ZHUA is UL approved and has a wide temperature range. Because of the integrated copper grounding wire the ZHUA also offers a fine EMI/EMP shielding, which makes it useable for applications where a high degree of electrical continuity is required. Another unique feature of the ZHUA is, that it is extremely flexible at both high as low temperatures. The ZHUA is often being applied in the subway-, train- and...

Open the catalog to page 10
ATEX Fittings Catalogue - 11

Anaconda lECEx-ATEX cable-hosefitting, type BXA, nickel plated brass. ANACONDA ATEX FFTTPNGS The lECEx-ATEX approved barrier fittings type BXA are developed to protect several loose wires with a liquidtight flexible metal conduit in potentially explosive atmospheres (ATEX). They fit directly on every type of Anaconda Sealtite metal conduit. The barrier has to be made through a 2 component epoxy sealing which will be supplied together with the fittings. They are frequently used in the chemical and petrochemical Industry, Oil & Gas, off-shore and food industry. Typical applications are...

Open the catalog to page 11
ATEX Fittings Catalogue - 12

Anaconda lECEx-ATEX cable-hosefitting, type BXA AISI-316, stainless steel. The lECEx-ATEX approved barrier fittings type BXA AISI-316 are developed to protect several loose wires with a flexible metal conduit in potentially explosive atmospheres (ATEX). They fit directly on every type of Anaconda Sealtite conduit. The barrier has to be made through a 2 component epoxy sealing which will be supplied together with the fittings. The stainless steel AISI-316 material guarantees the best resistance against corrosion and chemical attacks. They are frequently used in the chemical and petrochemical...

Open the catalog to page 12

All Anamet Europe catalogs and technical brochures

  1. HTUA

    1 Pages

  2. PA6S

    16 Pages

  3. PA6L

    16 Pages

  4. EF

    2 Pages

  5. EF-M

    2 Pages

  6. FCD

    10 Pages

  7. SL

    6 Pages

  8. Atex catalogue

    48 Pages

  9. HEAT PRODUCTS

    32 Pages

  10. Sealtite CNP

    4 Pages