Atex catalogue
48Pages

CONDUIT SYSTEMS ANACONDA lEXEx-ATEX FITTING SOLUTIONS ANAMET EUROPE YOUR SPECIALIST FOR lECEx-ATEX FITTINGS

Conduit and tting selection table Anaconda ATEX solutions. Temp. (°C) Galvanised steel Stainless steel AISI-304 Galvanised steel HTDL Black ZHUA Black Flexi- Resistance bility ProtecPage tion TPU Halogen free RoHS 4 ++++ ++++ ++++ (1000N) ++++ ++++ 4 ++++ ++++ ++++ (1000N) TPU Galvanised Halogen-free -55 steel RoHS Nickel plated -60 +130 brass Nickel plated -40 +100 brass Nickel plated -40 +100 brass Nickel plated -40 +100 brass Nickel plated -60 +130 brass Nickel plated -40 +100 brass Nickel plated -40 +100 brass Thread size range Approvals ATEX Protection Page GOST * For type BXA and BXC...

Description Anaconda IECEx-ATEX cable-hose-ttings The Anaconda IECEx-ATEX certied cable-hose-ttings together with the Anaconda Sealtite conduits represent the ideal solution for the mechanical protection of cables and for the connection of equipment in a safe and explosionproof way. The temperature range of the standard version with an internal seal in EPDM is between -40°C and +100 °C, while the temperature range of the high temperature version with an internal seal in Silicone is between -70 °C and + 220 °C. The new barrier type with a 2 compound epoxy sealing has a temperature range from...

Localisation of Gas and Dust Ex-Zones Zone 2 Zone 0 Tank Flammable Liquid Flammable Dust IECEx-ATEX tting selection table: START Type BXA (straight) Loose wires ? Unarmoured cable ? Type BXA (straight) page 11 and 12 or Type BXC (for 45°/90°) page 25 till 28 or Type RNC (for 45°/90°) page 29 till 34 Armoured cable ? Type BAA (straight) page 21 till 24 or Type BAC (for 45°/90°) page 35 till 37 NO Type RAA (straight) page 13 till 20 ANACONDA ATEX FITTINGS ENGINEERING DATA

The Anaconda IECEx-ATEX cable-hose-ttings are certied and marked according to Directive 94/9/CE: Ex I M2 / II 2 GD. This means that our IECEx-ATEX ttings can be used in mines in zone 1, as well as in all other explosive atmospheres containing gases, vapours and mists in zone 1 and 2 and containing dusts in zone 21 and 22. Certication and marking of Anaconda IECEx-ATEX cable-hose-tting, according to standards: EN 60079-0 EN 60079-1 EN 60079-7 EN 61241-0 EN 61241-1 Next to the certication and marking according to directive 94/9/CE the Anaconda cable-hose-ttings are certied and marked...

Sealtite AS black: Robust & Anti-Static. The conduit Sealtite AS has been developed for all those applications in ATEX areas at risk of explosion, where the use of a conduit, coated with anti-static material is necessary. Using AS conduit, the possibility of electrostatic charges accumulating on the surface is excluded. Thus there will be no formation of sparks in the case of discharge by contact. Material & Construction: Construction: Galvanised steel core, square-locked with cord packing, thick smooth thermoplastic cover (PVC compound). From 1.1/2” a fully inter-locked prole will be used....

Sealtite HFX blue: Robust, halogen-free, very exible, good ame properties and superior chemical resistant. NF F 16-101. Temperature: -55 ºC to +105 ºC, intermittent up to +125 ºC. Colour: Blue. Type HFX blue is very suitable for installations, which are subject to frequent movements as HFX keeps its excellent exibility even at low temperatures. It is also used when halogen free components are required. The blue colour is used in Atex Exi applications like in turbines, generators, valves, pressure control, metering, in Oil& Gas, chemical and petrolchemical industry, shipbuilding industry and...

Sealtite HFI blue: Robust, halogen-free, very exible, chemical resistant, good ame properties and extra corrosion resistant. (Polyurethane). Cover specications: Polyurethane, lead-free according to RoHS, sunlight and UV resistant, suitable for outside installation. The cover is resistant against oil and grease. Special approvals: Flame properties according to NF F 16-101. Temperature: -55 ºC to +105 ºC, intermittent up to +125 ºC. Colour: Blue (also available in black). A halogen-free conduit for use in public areas. The features of the HFX cover are necessary in the eld of environment and...

Sealtite HTDL black: Robust, UL & CSA approved, wide temperature range. ANACONDA SEALTITE® SPECIAL Type HTDL is the most used Anaconda Sealtite® conduit with integral grounding copper wire (till 1.1/4”). The HTDL is UL & CSA approved and has a wide temperature range. Because of the integrated copper grounding wire the HTDL also offers a ne EMI/EMP shielding, which makes it useable for applications where a high degree of electrical continuity is required. thermoplastic cover (PVC compound). From 1.1/2” a fully inter-locked prole will be used. Cover specications: PVC (from size 1” lead-free...

Sealtite ZHUA black: Robust, UL approved, halogen-free, good ame properties (UL-94 V0). thermoplastic cover (Polyurethane). From 1.1/2” a fully inter-locked prole will be used. Cover specications: Polyurethane, lead-free acc. to RoHS, sunlight and UV resistant, suitable for outside installation. The cover is good resistant against oil and grease. Special approvals: UL-360 (le # E18917), material classication UL-94 V0. Suitable to use in hazardous environments according NEC 501-4B Class I, Division 2; Class II, Division 1 and 2; Class III, Division 1 and 2. Temperature: -55 ºC to +80 ºC,...

Anaconda IECEx-ATEX cable-hosetting, type BXA, nickel plated brass. ANACONDA ATEX FITTINGS The IECEx-ATEX approved barrier ttings type BXA are developed to protect several loose wires with a liquidtight exible metal conduit in potentially explosive atmospheres (ATEX). They t directly on every type of Anaconda Sealtite metal conduit. By using the right connection set they also t on non covered conduit types like Anaconda Multiex SL, SLI, UIG, UI and SLB. The barrier has to be made through a bi-compound epoxy sealing which will be supplied together with the ttings. They are frequently used in...