Call 800.959.0299 to speak with a sales representative or visit us on the web at www.analyticaltechnology.com Total Chlorine Measurement System is a highly versatile on-line monitoring system designed for the continuous measurement of total chlorine in solution. This direct measuring system does not require the addition of chemical reagents to measure total chlorine. The Q46H/79PR is well suited for potable water systems, water reuse systems, cooling towers, aquariums, and for monitoring wastewater treatment effluents. The basic sensing element used in the total chlorine monitor is a 3-electrode amperometric membrane sensor which measures chlorine directly. The chlorine measurement does not alter the sample or add any chemicals to the sample stream, so the water flow can return to the system if desired. In addition to total chlorine measurement, the Q46/79PR is also available with an optional pH input which provides a two-parameter monitoring system. Flowcell Style Sensor MONITOR YOUR TOTAL CHLORINE ...Reagent Free

EASY INSTALL Want to simplify installation? ATI can supply the Q46H/79PR complete with sample flow controls mounted to a PVC back plate ready to mount. Connect power, water sample, and analog/relay outputs and you’re ready to go. Systems are available with or without a flow switch for remote indication of loss of sample. pH Sensor Flow Switch Constant-Head Flowcell Flow Regulator Chlorine Sensor Flow Indicator Filter Ball Valve FEATURES Total Chlorine. Membraned-covered amperometric sensor that measures total chlorine without the addition of pH buffer, iodide solution, or other reagents. The...

SENSOR & FLOWCELL OPTIONS Two types of chlorine sensors are available. One is designed for flowcell installation, and the other is for submersion applications. Total chlorine monitoring below a concentration of 0.5 PPM should be done using a flowcell system if possible. Good control of sample flow and pressure is important for accurate measurement. The standard constant-head flowcell should be used for most applications. A sealed flowcell and a low-volume flowcell are also available for special applications. Consult your ATI representative for application assistance. Submersible total chlorine...

ELECTRONIC MONITOR Display Range SENSOR & FLOWCELL Sensor ORDERING INFORMATION Model Q46H/79PR-A-B-C-D-E-F Total Chlorine Monitor Suffix A - Power 1 - 100-240 VAC, ±10%, 50/60 Hz 2 - 12-24 VDC, (requires 300 mA) Suffix B - Sensor Style 1 - Sensor with constant head flowcell and 25' cable 2 - Submersible sensor with 25'cable 3 - Sensor with sealed flowcell Suffix C - pH Sensor Input 1 - None 2 - Q22 pH Sensor with battery preamp, 25 ft. cable 3 - Standard pH sensor with 25 ft. cable & adapter for overflow cell 4 -Standard pH sensor with 25 ft. cable & sealed flowcell Suffix D - Digital Output 1...