Residual Chlorine Monitor Q46H / 62-63
4Pages

{{requestButtons}}

Catalog excerpts

Residual Chlorine Monitor Q46H / 62-63 - 1

Call 800.959.0299 to speak with a sales representative or visit us on the web at www.analyticaltechnology.com ATI’s Model Q46H Chlorine Monitor is the latest version of our proven Q Series monitoring instruments for free or combined chlorine. Monitor capabilities have been expanded to include options for a 3rd analog output or for adding additional low power relay outputs. Digital communication options for Profibus DP, Modbus RTU, Modbus TCP/IP or Ethernet IP have been added, as well. The Q46H system uses a polarographic membraned sensor to measure chlorine directly, without the need for chemical reagents. When needed, automatic pH compensation may be added for highest free chlorine measurement accuracy. Systems are available to provide 4-20 mA outputs for chlorine, pH, and temperature to allow easy CT calculations. Q46H systems are economical to purchase, economical to maintain, and provide long term accuracy and reliability for your chlorine monitoring needs. Q46H Flowcell Style Sensor MONITOR YOUR CHLORINE ...Reagent Free

Open the catalog to page 1
Residual Chlorine Monitor Q46H / 62-63 - 2

EASY INSTALL. Want to simplify installation? ATI can supply the Q46H complete with sample flow controls mounted to a PVC back plate ready to mount. Connect power, water sample, and analog/relay outputs and you’re ready to go. Systems are available with or without a flow switch for remote indication of loss of sample. pH Sensor Flow Switch Constant-Head Flowcell Flow Regulator Chlorine Sensor Flow Indicator Filter Ball Valve FEATURES. Free or Combined Chlorine. Q46H Monitors are factory set for either Free or Combined Chlorine measurement, but can easily be converted from one to the other in...

Open the catalog to page 2
Residual Chlorine Monitor Q46H / 62-63 - 3

SENSOR & FLOWCELL OPTIONS. Two types of chlorine sensors are available. One is designed for flowcell installation, and the other is for submersion applications. Free chlorine monitoring should always be done using a flowcell system. Good control of sample flow and pressure is important for accurate measurement. The standard constant-head flowcell should be used for most applications. A sealed flowcell and a low-volume flowcell are also available for special applications. Consult your ATI representative for application assistance. Submersible combined chlorine sensors can sometimes be used...

Open the catalog to page 3
Residual Chlorine Monitor Q46H / 62-63 - 4

ELECTRONIC MONITOR Display Range SENSOR & FLOWCELL Sensor NOTES: 1 - All systems are supplied w/one package of membranes, one 120 cc bottle of electrolyte, & one spare parts kit containing 3 each of all o-rings & special screws. 2 - Suffix D, 2, 3, or 4 allow Q46H to supply outputs for both chlorine & pH. 3 - Flowcell for Cl2 / pH combo systems should be kept within 25 ft of monitor. 4 - Buffer packet for pH 4 & 7 supplied with opt. 2, 3 or 4, suffix D. 5 - Pipe mount requires two 2"U-bolts (47-0005). ORDERING INFORMATION Model Q46H/62-63 A-B-C-D-E-F-G Chlorine Monitor Suffix A -...

Open the catalog to page 4

All Analytical Technology catalogs and technical brochures

  1. C12-17

    2 Pages

  2. F12/D

    4 Pages

  3. ChlorLog

    2 Pages

  4. E12-15 IR

    2 Pages

  5. Metrinet

    4 Pages

  6. Model Q45N

    4 Pages

  7. Q45H/64

    2 Pages

  8. Q45C2

    2 Pages

  9. Q22PX

    2 Pages

  10. Model Q45P/R

    2 Pages