Metrinet
4Pages

Catalog excerpts

MetriNet, derived from Network Metrics, is a low-power, modular system for monitoring water quality parameters and collecting data at remote locations. This system is ideal for monitoring drinking water distribution systems, greenhouse water delivery systems, produce section misting systems, and other clean water applications. Modbus RTU Ethernet/IP Profibus DP At the heart of the MetriNet system are a new series of smart digital sensors. M-Nodes are a complete sensor and transmitter housed in a miniaturized body. M-Nodes operate as independent modules that can be linked via a communication...

Open the catalog to page 2

A typical MetriNet system that is connected to a continuous sample flow of 200 ml/min will consume about 75 gallons per day. In many cases, this amount of water consumption will not be significant. However, in some cases, the user may wish to minimize the amount of water consumed by the MetriNet system. The MetriNet controller provides a cyclic operating mode that allows the user to minimize the daily water consumption. When the solenoid valve is closed, there is no flow to the system and no measurements are taken. At user specified intervals, the solenoid valve is opened to allow...

Open the catalog to page 3

MetriNet controllers contain a GPS module so that users may automatically identify the exact location of an installation. Using the GPS data, sites can be easily tied to map locations. If a controller is moved to another location, the position change is again updated. AVAILABLE M-NODES M-Node sensors are available for a variety of water quality parameters. Users simply select the parameters required for a specific location and assemble them into an integrated system. All Nodes communicate on a common RS-485 sensor bus using Modbus protocol. Each M-Node has an IP-67 M8 water-tight connector...

Open the catalog to page 4

Metrinet 4Pages

Catalog excerpts

All Analytical Technology catalogs and technical brochures

Metrinet
4Pages