Total Residual Chlorine Monitor Model Q45H/79

Chlorination of potable water, wastewater effluent and cooling water is widely used throughout the world to control biological activity in the water. Disinfection of potable water with chlorine ensures that the tap water is safe to drink once it has passed through the distribution system. Wastewater disinfection helps to ensure that receiving streams are safe for recreational use, and cooling water chlorination reduces biofouling that can degrade heat transfer efficiency. In addition to these common uses, there are many other applications where chlorine addition helps to reduce biological contamination....

Operation and Features Operation The sample to be measured is pumped to the inlet flow block located in the side of the chemistry module, from which a small filtered sample is then taken and mixed with pH 4 buffer and potassium iodide. The reacted sample now moves to a special flowcell assembly where the iodine is measured with a membraned amperometric sensor. The signal from the sensor with temperature are then processed by the monitor and displayed on the monitor in parts per million total residual chlorine. The Q45H/79 is available either with the monitor mounted on the chemistry module or...

Model Q45H/79 Total Residual Chlorine Specifications Represented By: PDS-Q45H-79 (04/08) Analytical Technology, Inc. 6 Iron Bridge Drive Collegeville, PA 19426 Phone: 610/917-0991• Toll-Free: 800/959-0299 Fax: 610/917-0992 E-Mail: [email protected] Analytical Technology 33 Stamford St. Mossley, Ashton-u-Lyne 0L5 0LL Phone: +44 (0) 1457 832800 Fax: +44 (0) 1457 839500 E-Mail: [email protected] Web Site: www.analyticaltechnology.com Electronic Monitor Display Range: 0-200 PPB or 0-2.000, 0-20.00 PPM Accuracy: ± 0.01 PPM or 0.5% of F.S. Repeatability: ± 0.01 PPM or 0.5% of F.S. Linearity:...