This highly precise, stable and accurate dual channel infrared carbon dioxide sensor supplied in an aluminium housing includes an onboard, barometric pressure sensor compensating for the effect of atmospheric pressure. It is available in a variety of ranges from 0-5000 ppm to 0-100% and can provide either a 0 to 2v or 4-20mA output. The housing is supplied complete with a flow adapter to allow sample gas to be passed over the IR bench; a green status LED is fitted as standard. The 5S MkIII is an advanced, solid-state, infrared transducer utilizing high quality optical components to ensure that measurements are specific to carbon dioxide, with virtually no sensitivity to other gasses. Temperature compensation is achieved using unique smart detector technology, further enhanced by the addition of a temperature sensor mounted within the infrared bench, minimizing measurable temperature effects in the operating range. Our 5S MkIII is utilized as a robust and accurate industrial process gas sensor or as a part of a safety system in applications including laboratory research, commercial diving, agriculture and the beverage industry. The 5S MkIII carbon dioxide sensor is used within some Analox products including our SDA carbon dioxide monitor but also as an OEM solution, utilized by other analyser manufacturers and as an ambient CO2 sensor connecting to a control panel. Research Laboratory Medical Laboratory Analogue output Beverage & Hospitality Long life expectancy Commercial Diving Digital outputs Temperature compensated sensors with Pressure Sync technology Gas Detected Carbon Dioxide (CO2) Your Challenge, Our Passion Want to talk about your application requirements? Give us a call! Speak to UK/Global: +44 (0)1642 711 400 our team US Office: (714) 891 4478 today U

5S M k I I I Tech Spec Warm up time Response time Detection technique Infrared absorbtion Storage temperature Flow range Operating temperature Pressure range Power supply 9 to 36 V DC (regulated 5V option also available) To EN50270 2006, Type 2. Max deviation under 10V/m testing is 150 ppm Either 0-2V DC into load of >1000 Ohms or 4-20mA into load of <=400 Ohms (specifiy at time of order) Warm up fault conditions Either >2V DC (0-2V DC option) or >20mA (4-20mA option) Dimensions (WxHxD) 115 x 70 x 40 mm (including flow adaptor) 4.5 x 2.5 x 1.6 inches (including flow adaptor) Accuracy varies depending...