- Catalogs
- Analogix Semiconductor, Inc.
- USB Type-C to HDMI2.0b Converter with Charging Function
USB Type-C to HDMI2.0b Converter with Charging Function
USB Type-C to HDMI2.0b Converter with Charging Function
- Complies with USB Type-C Specification 1.2 and is backward compatible with Type-C Specification 1.1.
- Supports USB Power Delivery (PD) v3.0 with two integrated Channel Configuration (CC) and PD Logic ports.
- VESA DisplayPort v1.4 compliant receiver with 1, 2, and 4 lanes up to HBR3 (8.1Gbps) input.
- HDMI Specification v2.0b compliant transmitter supporting up to 4096x2160@60Hz.
- Supports HDCP2.3, HDCP2.2, and HDCP1.4 repeater with internal HDCP keys.
- Video stream support for High Dynamic Range (HDR) metadata and 3D timing.
- Audio stream support with a maximum audio sample rate of 192KHz x8 channels, including 8-channel LPCM and compressed audio (AC-3, DTS).
- Integrated reference clock and on-chip micro-controller with integrated memory.
- Serial and debug interfaces supporting I2C Slave and master interface, up to 1MHz.
- Supports 3.3V and 0.9V power supply with flexible firmware update methods.
- Package: QFN-64, 8mmx8mm, 0.4mm pin-pitch, suitable for commercial temperature range of 0°C to 70°C.
- ANX7750: DisplayPort Converter (4K@30Hz) with 1-lane DisplayPort1.2a input.
- ANX9837: DisplayPort Converter (WQXGA, 2560x1080@60Hz) with two-lane high-speed differential input at 5.4Gbps, 2.7Gbps, or 1.62Gbps.
Catalog excerpts
Product Brief ANX7518 is a USB-C to HDMI2.0b converter with charging function, which includes 3D display delivery capability. It can support up to 8.1Gbps speed with 4lanes in conjunction with any 4K@60 DP alternate mode USB-C source. ANX7518 transforms the DisplayPort out of a USB-C source to HDMI or DVI so that the device can connect to any high-definition TV, monitor, or projector. It includes an additional port controller to deal with charging from USB-C power adapter. • USB Type-C Specification 1.2 and backward compatible with Type-C specification 1.1 - USB Power Delivery (PD) v3.0 Compliant - Two integrated Channel Configuration (CC) - Support USB2.0 Billboard function • VESA DisplayPort™ (DP) v1.4 compliant receiver - Horizontal Blanking Expansion Operation - 27dB insertion loss recovery • HDMI Specification v2.0b compliant transmitter - TMDS scrambling up to 600MHz pixel clock - SCDC (Status and Control Data Channel) • Support HDCP2.3, HDCP2.2 and HDCP1.4 repeater with HDCP keys inside • Video stream - Support High Dynamic Range (HDR) metadata • Audio Stream - Max audio sample rate of 192KHz x8 channels - 8-ch LPCM, compressed audio (AC-3, DTS) • Integrated reference clock • On chip micro-controller (OCM) and integrated • Serial and debug interfaces - Support I2C Slave and master interface, up to - Re-purpose GPIOs for UART or I2C master interface • Support 3.3V and 0.9V power supply • Flexible Firmware update methods • Commercial temperature range of 0C to 70C
Open the catalog to page 1
Product Brief Related Products Part Number Copyright ©2015 Analogix Semiconductor, Inc. 3211 Scott Blvd., Suite 103 Santa Clara, CA 95054, USA +1 (408) 988-8848 ©2015 Analogix Semiconductor, Inc. All Rights reserved. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT ANY EXPRESS REPRESENTATIONS OF WARRANTIES. IN ADDITION, ANALOGIX SEMICONDUCTOR INC. DISCLAIMS ALL IMPLIED REPRESENTATIONS AND WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTURAL PROPERTY RIGHTS. This document contains proprietary...
Open the catalog to page 2All Analogix Semiconductor, Inc. catalogs and technical brochures
USB-C™ Port Controller2 Pages
