1. Catalogs
  2. Analogix Semiconductor, Inc.
  3. USB Type-C™ Crosspoint Switch with On-chip Microcontroller

USB Type-C™ Crosspoint Switch with On-chip Microcontroller
1 /2Pages

USB Type-C™ Crosspoint Switch with On-chip Microcontroller

USB Type-C™ Crosspoint Switch with On-chip Microcontroller
1 /2Pages

Catalog excerpts

USB Type-C™ Crosspoint Switch with On-chip Microcontroller-1

Product Brief ANX7437 is an intelligent crosspoint switch that supports switching at data rates of up to 10Gbps. ANX7437 supports highspeed interfaces, such as USB 3.1 (Gen 1 - 5Gbps, Gen 2 - 10Gbps). ANX7437 is designed as a companion IC to various CPUs and Application Processors (APs) to enable notebooks, desktops, and 2-in-1 PCs to use the reversible USB Type-C (USB-C™) connectors. An On-chip Microcontroller (OCM) is available to manage the signal switching, Channel Configuration (CC) detection, USB Power Delivery (USB-PD) charging and Vendor Defined Message (VDM) protocol, and other functions, as defined in the USB Type-C v1.2 and USB Power Delivery v3.0 specifications. ANX7437 can be configured for a Downstream Facing Port (DFP) or Dual-Role Port (DRP) to support a USB-C receptacle. • USB 3.1 signal (SSTX and SSRX) with Gen1 (5Gbps) and Gen2 (10Gbps) link speed • Native TCPC-compliant hardware register interface • Supports DFP and DRP modes for Host-only or DualRole applications • Integrated VCONN FETs • Built-in 10-bit ADC to monitor VBUS voltage and current • Dedicated control signals for VBUS Source FET, VBUS sink FET, and VBUS auto discharge circuity • Serial and debug interfaces - Slave interface - Direct Connect Interface (DCI) debug support • Industry standard compatibility - USB Power Delivery v3.0 r1.0 specification - Universal Serial Bus (USB) Type-C Port Controller Interface r1.0 specification • Low-power design - Dedicated supply power pin for flexible I/O power 1.8V or 3.3V - Ultra-low power consumption (typical 80uW) in standby mode • On-chip Microcontroller (OCM) to implement signal switching and USB-PD messaging - 64K bytes SRAM for firmware execution - 128K bytes Flash for firmware storage - PDFU function for firmware updating • Dead battery detection support • Package offered: 48-pin QFN, 6mm x 6mm, 0.90mm Z-height, pin-pitch: 0.4mm

 Open the catalog to page 1
USB Type-C™ Crosspoint Switch with On-chip Microcontroller-2

Product Brief Related Products Part Number Copyright ©2018 Analogix Semiconductor, Inc. 3211 Scott Blvd., Suite 100 Santa Clara, CA 95054, USA +1 (408) 988-8848 ©2018 Analogix Semiconductor, Inc. All Rights reserved. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED “AS IS” WITHOUT ANY EXPRESS REPRESENTATIONS OF WARRANTIES. IN ADDITION, ANALOGIX SEMICONDUCTOR INC. DISCLAIMS ALL IMPLIED REPRESENTATIONS AND WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTURAL PROPERTY RIGHTS. This document contains proprietary...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.