Product Brief ANX2403 is the world's lowest power two-lane embedded DisplayPort™ (eDP) 1.4 compliant TCON with Panel Self Refresh (PSR) and Selective update PSR (PSR2) functions. ANX2403 supports Microsoft and Wacom in-cell pen and finger touch functions. It also supports Intel HDR400, which meets ST.2084 and BT.2020 standards. - Integrated high-speed DP-Rx compliant with DisplayPort standard eDP v1.4 - PSR/MBO/PSR2 function through built-in SRAM • Source IC interface: CEDS/iSP/EPI/ATPI - Up to 12 pairs to support 6-channel 2D/1C or 12-channel 1D/1C configuration - CEDS/iSP/EPI/ATPI transmitter up to 2.0Gbps configuration - Various swap modes: inter-port swap, intraport swap, p/n swap, RGB swap, odd/even pixel swap, etc. - Scan direction swap - Supports Z-inversion (column inversion), and N-line inversion - Dual gate mode combined with Z-inversion and non-Z inversion mode - CEDS/iSP/EPI/ATPI test pattern mode • TCON functions - eDP TCON color depth: 18/24bpp input (30bpp input for HDR), 18/24bpp output - Programmable fail-safe mode control - Configurable BIST pattern - 10-bit Gamma correction table for each color - Multiple FRC pattern configurations - Color-engine for hue and saturation control - LCD overdrive to reduce motion blur in high-performance mode - Direct drive G-sync, Free sync, and Adaptive sync - eDP sDRRS power saving function - Splash-screen feature - In-cell Touch function combined with PSR - Microsoft/Wacom In-cell timing requirement On-chip SSCG - CEDS/EPI/iSP/ATPI 1.6G <Fceds ^2G (Max. +/-0.5% with 0.25% step, 10/20/30/40KHz, center spreading) - CEDS/EPI/iSP/ATPI Fceds^1.6G (Max. +/-1% with 0.25% step, 10/20/30/40KHz, center spreading) - BT.2020 to sRGB color space mapping - DPCD handshake Pattern detection EEPROM shared for EDID and configuration In-cell touch support for Microsoft and Wacom PWM generator, PWM pass-through and PWM product modes TSMC 28nm HPC+ process Lowest power from 60mW to 80mW (depending on whether PSR is on or off) Power supply: 1.8V/0.9V (internal 3.3V for HPD) Package: BGA-91 (5x9mm), LGA-74 (5x12mm) 0-D dimming control (DBC) function for backlight low power

ANX2403 Product Brief XTAL_IO (option) LC_Tank & ODFC_PLL BIST/ Fail Safe Touch Or PSR mode POL signal Gate Timing Internal Config Bus AUX Link Copyright ©2018 Analogix Semiconductor, Inc. 3211 Scott Blvd., Suite 100 Santa Clara, CA 95054, USA +1 (408) 988-8848 http://www.analogix.com/ ©2018 Analogix Semiconductor, Inc. All Rights reserved. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED “AS IS” WITHOUT ANY EXPRESS REPRESENTATIONS OF WARRANTIES. IN ADDITION, ANALOGIX SEMICONDUCTOR INC. DISCLAIMS ALL IMPLIED REPRESENTATIONS AND WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY, FITNESS...