Product Brief ANX7496 is a DisplayPort 4-lane re-timer capable of conditioning DP signals up to 8.1Gbps (supports HBR3, HBR2, HBR, RBR rates). ANX7496 can compensate signal loss of up to 27dB and can operate in either DP transparent mode or Link-Trainable Tunable PHY Repeater (LTTPR) mode. ANX7496 integrates the DP AUX signal pass-through and is protocol aware for better link power management and power savings. ANX7496 can be in various types of applications such as PCs, mobile, accessories, monitors, and VR HMDs with various connectors such as mini-DP, standard-DP, or even USB Type-C™ (USB-C™). • Built-in re-timers - Integrated re-timers (Link training-tunable PHY repeater) for DisplayPort up to HBR3 @ 8.1Gbps - Supports both transparent mode and nontransparent mode (transparent or LTTPR) - Loss compensation to recover up to 27dB channel loss - Integrated AUX detection for link training and protocol awareness for better link power management (LPM) • Reference clock for re-timer - Utilizes a 24MHz reference XTAL or 1.05V single-ended clock source • Serial and debug interfaces - I2C Slave interface, up to 1MHz, for re-timer configuration • Industry standard compatibility • Low-power design - Analog power supply at 1.8V - Dedicated supply power pin for I/O power at 1.8V • Commercial temperature range of 0C to 70C

Product Brief Related Products Part Number Copyright ©2018 Analogix Semiconductor, Inc. 3211 Scott Blvd., Suite 100 Santa Clara, CA 95054, USA +1 (408) 988-8848 http://www.analogix.com/ ©2018 Analogix Semiconductor, Inc. All Rights reserved. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED “AS IS” WITHOUT ANY EXPRESS REPRESENTATIONS OF WARRANTIES. IN ADDITION, ANALOGIX SEMICONDUCTOR INC. DISCLAIMS ALL IMPLIED REPRESENTATIONS AND WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTURAL PROPERTY RIGHTS. This...