ASP2010TC
2Pages

Accurate • Reliable • Smart • Valuable ASP2010TCMultiple Parameter Introduction The ordinary pressure transmitter needs simultaneously three transmitters to measure the three main parameters of differential pressure, absolute pressure, process temperature for the process objects to realize the flow measurement of temperature compensation, then transmits the parameter signals to flow totalizer to figure out the flow value, finally puts them into the DCS, PLC and circuit controller. The controller transfers the signals to executive elements to accomplish the control of the circuit. However, the new-type ASP2010TC multiple parameter flowmeter can realize the same function as three ordinary pressure transmitters, it not only reduces the quantity of pressure transmitters, but also saves cost and is convenient to improve the reliability and accuracy of system. The ASP2010TC multiple parameter flowmeter adopts the advanced composed micro-silicon solid-state sensors with an internal module to measure differential pressure, absolute pressure, working temperature, it can also connect with a medium temperature measurement module to become a highly effective flow measurement system. The ASP201OTC multiple parameter flowmeter has three output ports so that it can be used as a flowmeter, and it can also be the measurement device of the branch signal for concentrated flow, which is with extremely high application value. Wiring introduction Power supply :24DC Three-way output(4-20mA): mAl: Main Variant mA2: Medium Temperature mA3: Gauge Pressure MODBUS protocol wire A,B correspond to RS485 wire A+ and B-. ♦ Pt+, Pt- are the output of external medium temperature, PT100 is measuring element Display Interface Sensor Temperature— Instaneous Flow — Differential Pressure — Gauge Pressure

Accurate • Reliable • Smart • Valuable Sensors ■ Instruments - IOT Systems Selection Guide