Catalogs >
Analog Devices >
AD2410W: Automotive Audio Bus A2B Transceiver Preliminary Data Sheet

AD2410W: Automotive Audio Bus A2B Transceiver Preliminary Data Sheet
2Pages

Catalog excerpts

AD2410W: Automotive Audio Bus A2B Transceiver Preliminary Data Sheet - 1

Automotive Audio Bus A2B Transceiver AD2410W Preliminary Technical Data A2B BUS FEATURES GENERAL DESCRIPTION Line topology Single master, multiple slave Up to 10 meters between nodes Up to 40 meters overall cable length Communication over distance Synchronous data Multichannel I2S/TDM to I2S/TDM Clock synchronous, phase aligned in all nodes Control and status Information I2C to I2C Phantom power Configurable with SigmaStudioTM graphical software tool The Automotive Audio Bus (A2BTM) provides a multi-channel, I2S/TDM link over distances of up to 10 meters between nodes. It embeds bi-directional synchronous data (for example digital audio), clock and synchronization signals onto a single differential wire pair. A2B supports a direct point-to-point connection and allows multiple, daisy chained nodes at different locations to contribute or consume time division multiplexed channel content. A2B is a single-master, multiple-slave system where the transceiver chip at the host controller is the master. It generates clock, synchronization and framing for all slave nodes. The master A2B chip is programmable over a control bus (I2C) for configuration and read back. An extension of this control bus is embedded in the A2B data stream allowing direct access of registers and status information on slave transceivers as well as I2C-to-I2C communication over distance. ADDITIONAL AD2410 TRANSCEIVER FEATURES Configurable as A2B bus master or slave I2C Interface 8-bit to 32-bit multichannel I2S/TDM interface Up to 32 upstream channels or combination with up to 32 downstream channels I2S/TDM or PDM Microphone inputs Complete technical specifications are available for the A2B transceiver. Please contact your nearest Analog Devices sales office to complete the Non-Disclosure Agreement (NDA) required to receive additional AD2410W technical information. APPLICATIONS Automotive audio communication link Communication network for: Microphones/speakers Sensor/actuator I2C Peripherals IOVDD DVDD SCL SDA IRQ/IO0 ADR1/IO1 ADR2/IO2 A/BTRXVDD A2B TRX B (Towards Last Slave) DIAGNOSIS A2B TRX A (Towards Master) Figure 1. AD2410W Block Diagram A2B and the A2B logo are trademarks of Analog Devices, Inc. Rev. PrA Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 U.S.A. Tel:781.329.4700 www.analog.com Fax:781.461.3113 ©2014 Analog Devices, Inc. All rights reserved.

Open the catalog to page 1

AD2410W: Automotive Audio Bus A2B Transceiver Preliminary Data Sheet - 2

AD241OW Preliminary Technical Data ORDERING GUIDE 1Z = RoHS Compliant Part. 2 Referenced temperature is ambient temperature. The ambient temperature is not a specification. 3 Full temperature range not tested or guaranteed for ENG grade product. 2014 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.

Open the catalog to page 2