EXTRUSION LINES FOR PICTURE FRAMES

Product catalog summary

Introduction
The document discusses the new generation of AMUT extrusion lines for producing decorative profiles and picture frames using foam thermoplastic materials. AMUT's extensive experience over 40 years forms the foundation for these projects, focusing on maximizing advantages for customers.

Product and Process Advantages

Product Advantage: The use of thermoplastic materials instead of wood results in an eco-friendly product with a high-quality finish at reduced costs.
Process Advantage: AMUT's extrusion technology involves chemical foaming by mixing base materials with a foaming additive, significantly reducing raw material costs and achieving a density of 0.4 to 0.6 gr/cm3 with excellent mechanical properties.

Main Technical Features

The extrusion line includes models EA60, 70, and 90, designed with a modular concept and driven by AC motors controlled by vectorial frequency inverters to reduce maintenance.
Special screw geometry optimizes material flow and distribution of foaming agents.
Barrels and screws are made from nitrided steel for high wear resistance.
The structural foaming system occurs in the sizer, avoiding issues with the "free foam" process.
A vacuum trough with immersion cooling ensures high extrusion speeds and excellent surface finish.
All water-contact parts are stainless steel, and the haul-off unit prevents surface damage.
High precision inline cutting system and simplified control operations.
Optional hot printing units and suitability for non-foam thermoplastics like PVC, ABS, and PS.

Conclusion
AMUT's extrusion lines are designed to meet customer needs with flexibility in mechanical and structural properties, ensuring high-quality, cost-effective production.

Catalog excerpts

Linee di estrusione per Cornici Decorative Italiano - English Extrusion Lines for Pictures Frames

Open the catalog to page 1

Linee di estrusione per Cornici Decorative THE NEW GENERATION OF AMUT EXTRUSION LINES FOR DECORATED PROFILES AND PICTURE FRAMES PRODUCED FROM FOAM THERMOPLASTIC MATERIALS The experience gained over more than 40 years of extrusion is the starting point for each new AMUT project. The principle on which each project is based, is very simple : offer the greatest advantages. The aim is to develop a strategy which will best satisfy the production requirements and assure the highest profit margin for the customer. AMUT's policy is dictated by this principle throughout the planning and manufacturing...

Open the catalog to page 2

Gli estrusori EA 60,70 e 90 sono costruiti secondo una filosofia modulare ed equipaggiati con motori AC controllati da inverter di frequenza vettoriali per ridurre notevolmente le operazioni di manutenzione. La particolare geometria della vite consente lavorazione e scorrimento del materiale ottimali nonchè una perfetta distribuzione degli additivi espandenti e coloranti. Cilindro e vite sono eseguiti in acciaio nitrurato per garantire un'elevata resistenza all’usura. Il sistema di espansione strutturale dei materiali termoplastici si sviluppa nel calibro, evitando così gli inconvenienti legati...

Open the catalog to page 3