Flexicut 1020

Product catalog summary

Overview: The FLEXICUT 1020 is a milling tool designed for efficient deburring and deflashing of both metallic and non-metallic parts. It supports high feed rates while maintaining consistent quality and can be used in any orientation due to its compliant spindle.

Specifications:

Power: 1.3 kW (1.74 hp)
Idling Speed: 25,000 rpm
Rated Speed: 20,000 rpm
Compliance: Radial in all directions ± 3.2° / ± 16 mm
Compliance Torque: 0-15 Nm at Connection 1, 5-30 Nm at Connection 1 and 2
Max Compliance Force: 109 N at 6 bar (87 psi)
Feed Rate: 10-300 mm/sec
Air Consumption: 28 l/s (59.3 cfm)
Weight: 7.3 kg (16.1 lb)

Features:

The spindle is cardanically suspended, allowing deburring around circles and corners without changing tool orientation.
Pressure against the part edge can be adjusted via the robot program.
Can be mounted on a tool stand or robot arm, with an available tool changer for automatic switching.
Compatible with commercial milling inserts.
Requires oiled compressed air for optimal performance.

Technical Data:

Collet Sizes: ø6 mm, ø8 mm, 5/16", ø10 mm, 1/4", 3/8"
Air Connections: BSP 3/8"/ø12, 2 x BSP 1/8"/ø6

Mounting Information: The document provides detailed mounting dimensions and configurations for different mounting faces and compliance ranges.

Contact Information: Amtru Business AG, Schulstrasse 11, CH-8542 Wiesendangen, Switzerland. Phone: +41 52 320 91 10, Email: [email protected]

Catalog excerpts

FLEXICUT 1020 Das Fräswerkzeug FLEXICUT 1020 eignet sich zum wirtschaftlichen Entgraten und Verputzen von metallischen und nichtmetallischen Werkstoffen. Die hohe Drehzahl der Druckluftspindel erlaubt diesem Werkzeug grosse Vorschubgeschwindigkeiten bei gleichbleibender Entgratqualität. Es kann in jeder beliebigen Lage eingesetzt werden. Die Fräserspitze ist in alle Richtungen auslenkbar, wobei die notwendige Anpresskraft auf die Werkstückkante vom Roboterprogramm variiert werden kann. Diese Pendellagerung ermöglicht das Fahren um Kreise und Ecken ohne Orientierungsänderung. Das Fräswerkzeug kann entweder am Roboterarm oder stationär an einem Werkzeugständer (Toolstand) angebaut werden. Sollen diese Werkzeuge am Roboter automatisch gewechselt werden, so steht ein WerkzeugWechselsystem (Changing System) zur Verfügung. Es können handelsübliche Fräsereinsätze verwendet werden. Für eine einwandfreie Funktion benötigt die Spindel geölte Druckluft. The milling tool FLEXICUT 1020 can be used for the economical deburring and deflashing of metallic as well as nonmetallic parts. It allows high feed rates with an uniform quality and can be applied in any orientation. The spindle is freely compliable in all directions. The pressure against the part edge can be set from the robot program. Thanks to the cardanic suspension of the spindle it is possible to deburr around circles and corners without changing the tool orientation. The milling tool can either be mounted stationary onto a tool stand (Toolstand) or onto the robot arm. If these tools at the robot have to be changed automatically, a tool changer (Changing Systems) is available. Commercial milling inserts can be used. The air motor needs oiled compressed air for

Open the catalog to page 1

11 Montageflansch quer zur Werkzeugachse / Mounting flange across to the tool axis Erganzendes Zubehor / Optional Accessories: Spannzange 06 mm Spannzange 08 mm, 5/i6' Spannzange 010 mm Spannzange 1/4" Spannzange %" Fraseinsatze Collet 06 mm Collet 08 mm, 5/15" Collet 010 mm Collet 1/4" Collet %" Burrs for deburring Artikel-Nr. / Article-No. 8985.124 8985.125 8985.126 8985.124 8985.126 auf Anfrage / on request

Open the catalog to page 2

Flexicut 1020

Flexicut 1020

Catalog excerpts

All AMTRU catalogs and technical brochures