- Catalogs
- ams Sensors Germany GmbH
- Optoelectronical components from MAZeT
Optoelectronical components from MAZeT
Optoelectronical components from MAZeT
JENCOLOUR® True Colour Sensors are engineered for high sensitivity and enhanced performance in detecting color deviations. They feature a PIN photodiode optimized for visible wavelengths and an interference filter mounted directly on the chip, with a particular sensitivity to blue light.
The sensors include microstructured on-chip interference filters with high transmission in the bandpass range, resistant to aging, mechanical impacts, and thermal influences. They adhere to the tri-stimulus value function as per DIN 5033 for precise color determination.
These sensors are ideal for applications requiring precise detection of emitting, remitting, or transmitting samples, such as LED testing, monitor calibration, and compact color measurement modules.
- Accurate and fast color detection
- Low dark current
- Signal input frequencies over 100 kHz
- RoHS compliant
- Values displayed as XYZ, calibrated in system L*a*b
The product line includes various sensor ICs and accessories, such as MTCSi True Colour Sensor ICs with different packaging options and the modEVA mainboard with USB interface.
This board is designed for color detection and measurement tasks according to DIN 5033 standards, featuring a microcontroller, USB interface, and software for calibration and control.
The MTI series provides multi-channel transimpedance amplifiers for sensors with current output, offering programmable bandwidth and high amplification.
The modEVA concept offers a modular application board for color detection and measurement, configurable in function, parameters, and interface.
These compact tri-color sensors with interference spectral filters for red, green, and blue are suitable for industrial applications requiring high dynamics and compact design.
The document highlights JENCOLOUR® RGB Colour Sensors as the smallest tri-color sensors globally, designed for applications needing steep filter curves and simple signal coupling.
Various models of RGB sensors are listed, each with specific features like transparent glob tops, IR-cut, optical lenses, and different packaging options.
The MCS-EB1 Starter Kit includes white light LEDs, RS232, power supply, serial cable, and software. It also mentions the MTIxx multi-channel preamplifier series.
For more details, readers are directed to visit the MAZeT website or contact their sales offices.
Catalog excerpts
MTSCiCSColour Sensor MTI04CSTransimpedance amplifier C8051F321 Controller withA/D converterand EEPROM USB Interface Voltage supplied >
Open the catalog to page 4
With the MTI series, MAZeT provides a family of multi-channel amplifier ICs (current-to-voltage conversion transimpedance amplifiers) for sensors with current output. These are distinguished, among other things, by a programmable bandwidth and high amplification. > VDDGNDSW1SW2 SW3SW4 IIN<1> IIN VREF OPAMP 1RC The ICs are offered in different RoHS compliant housings or - within the scope of customer projects - are also available as nakedђ chips (die) for Chip-On-Board (COB) assembly. > RC PD OPAMP X VOUT VOUT<1> The MTI series is currently available in two types, which differ in electrical parameters....
Open the catalog to page 5
With the MTI04CS/CQ, MAZeT now presents the second-generation multi-channel transimpedance amplifier. The MTI04CS/CQ now offers the ability to adapt the compensation of the transimpedance amplifier) to the input capacitance of the sensors, such as photodiodes. This is done digitally in two stages, 5 and 80pF. Programming of the transimpedance gain is carried out via three input pins to any of eight levels; and takes effect for all channels simultaneously. MTI04CS/CQ Characteristics: Parameter typ. Unit Condition 0,025 A Stage 1 0,05 յA Stage 2 Input Current 20 A Stage 8 Յ Ņ 20000 k Stage 1 1000...
Open the catalog to page 6
For industrial colour applications with high dynamics the new compact colour sensors are a preferred choice. Three areas, each of different colour, are responsible for the recognition - similar to the human eye. Colour sensors based on Si-PIN-diodes and dielectric filters on-chip feature a small design, high-quality filters and the synchronous recording of all three- color ranges. Furthermore, the circular alignment of the diodes allows simple coupling of the measurement signal using an optical fibre. The sensors are offered as default in the TO5 package with translucent plastic or cover glass...
Open the catalog to page 9
MCS3 RGB Sensors Art. Nr: MCS3AS with transparent glob top in SOP8 package V520P010310 MCS3AT with transparent glob top in TO5 package V520P010320 MCS3BT with IR-cut and transparent glob top in TO5 package V520P010321 MCS3AO with IR-cut and optical lens in TO5 package V520P010360 MCSiAT with transparent glob top in TO5 package 19x3 to 3 groups PIN technology V520P010420 MCSiBT with IR-cut and transparent glob top in TO5 package 19x3 to 3 groups PIN technology V520P010421 > MCS-EB1 Starter kit for all JENCOLOUR sensor-ICs incl. 4 x white light LED and RS232, power supply, serial cable and software...
Open the catalog to page 10All Ams Sensors Germany GmbH catalogs and technical brochures
Company Brochure20 Pages
EMS Services incl. Design2 Pages
MTCS-C32 Pages
ASIC Design Service Guide4 Pages
JENCOLOR2 Pages
Redesign of obsolete ASICs2 Pages
MAZeT Flyer2 Pages
JENCOLOR Flyer2 Pages
JENCOLOR- True Color Sensors2 Pages
MAZeT GmbH company facts20 Pages
Archived catalogs
MRGBiCS9 Pages
MRGBiCT7 Pages
Data Sheet - MTCSiCS8 Pages
Data Sheet - MTCS-ME125 Pages
Software Description MTCS-ME120 Pages
Data Sheet - MTI0412 Pages
Product information - MCS32 Pages
Data sheet - MCS3AS7 Pages
Data Sheet - MCS3AT/BT7 Pages
MAZeT flyer2 Pages
