The information contained in this documentation is the property of MAZeT. Photocopying or otherwise reproducing any part of the catalog, whether electronically or mechanically, is prohibited, except where the express permission of MAZeT GmbH has been obtained. In general, all company and brand names, as well as the names of individual products, are protected by brand, patent or product law. REVISIONS > REV. DESCRIPTION APPROVED 1 V 1.13 2007-08-01 Table of Contents 1. FUNCTION 2 2. APPLICATION 2 3. FEATURES 2 4. CONSTRUCTION 2 5. MAXIMUM RATINGS / CHARACTERISTICS 3 6. CHARACTERISTIC CURVE 4 7. PACKAGE OVERVIEW 5 8. PIN-CONFIGURATION 6 9. APPLICATION CIRCUIT 6 10. APPLICATION NOTE 6 11. ORDERING INFORMATION 7 > MAZeT GmbH Sales Gֶschwitzer Strae 32 07745 JENA / GERMANY Phone: +49 3641 2809-0 Fax: +49 3641 2809-12 E-Mail: [email protected] Url: http://www.MAZeT.de Released: 2007-08-01 Approvals Date > Compiled: 2007-08-01 Checked: 2007-08-01 Status: valid DOC. NO: DB-99-074e Page 1 of 7 size="-1">

REVISIONS DATA SHEET MCS3AT/BT > REV. DESCRIPTION APPROVED 1 V 1.13 2007-08-01 The color sensors are made of 3 Si-PIN photo diodes integrated on chip. They are carried out as segments of a ring with the diameter of 2,0 mm. The design as Si-PIN photo diodes allows signal frequencies up to MHz-range. In order to achieve a small cross talk between the photodiodes the individual sectors were separated from each other by additional structures. Each of these photodiodes is sensitized with dielectric spectral filter for its color range, preferably for the primary colors red, green and blue. > Quality...

1 % Angle of incidence > (Filter) < 1%* 8 Grad > VREF 0,4 Ѕ VDD 0,4 V > The information contained in these documents reflects the current state of the art at the time of publication and is of a provisional nature. MAZeT explicitly reserves the right to make technical changes to the equipment and components described in the documentation. DOC. NO: Page 3 of >

REVISIONS DATA SHEET MCS3AT/BT > REV. DESCRIPTION APPROVED 1 V 1.13 2007-08-01 (Top view) KA1A2A3 PIN description 1 A1 red 2 A2 blue 3 A3 green K common cathode TO5-package > Opposite figure shows a circuit for the conversion of photo current to an equivalent voltage. These voltage can be processed e.g. with an ADC. By the selection of suitable resistors the output voltage range can be adjusted to the photo current value. (for example the pin-programmable transimpedance amplifier MTI04 with the resistors 25k , 500k and 5M ) > PhotoOutx VDD IIIRR RVV V grnrotblau 12 3blaurotgrn MCS3ATMCS3BT VREF...

REVISIONS DATA SHEET MCS3AT/BT > REV. DESCRIPTION APPROVED 1 V 1.13 2007-08-01 Color sensor with TO5-package, transparent encapsulated (plastic) MCS3AT Color sensor with TO5-package, with top and IR-blocking windows MCS3BT Evaluation board for JENCOLOR sensors MCS-EB1 For further information please contact: MAZeT GmbH Sales office: Gschwitzer Strae 32 07745 JENA GERMANY Phone: +49 3641 2809-0 Fax: +49 3641 2809-12 E-Mail: [email protected] Url: http://www.MAZeT.de > WARNINGS Personal Injury 柖 Do not use these products as safety or emergency stop devices, or in any other applications where failure...